$1,649.00/Each
Ships free with PlusEarn up to $49.47 back (4,947 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Rugged cast iron housing with a corrosion-resistant epoxy-coated finish
- 1 hp motor operates at a rate of 1,725 RPM
- Tri-Slice cutter technology reduces solids down to 1/8" with a rate of over 250,000 cuts per minute
- Has a 1 1/4" NPT discharge, a max flow rate of 14.6 GPM, and oil-filled cooling
- Pressure relief valve helps prevent damage to your piping system
- Quantity
- 1/Each
- Shipping Weight
- 96.1 lb.
- Height
- 24 7/16 Inches
- Diameter
- 10 3/8 Inches
- Power Cord Length
- 20 Feet
- Amps
- 7 Amps
- Hertz
- 60 Hz
- Phase
- 1 Phase
- Voltage
- 230 Volts
- Color
- Green
- Discharge Size
- 1 1/4 Inches
- Features
- Corrosion-Resistant Made in America
- Finish
- Epoxy
- Flow Rate
- 14.6 GPM
- Horsepower
- 1 HP
- Material
- Cast Iron
- Plug Type
- NEMA 5-15P
- Power Type
- Electric
- RPM
- 1,725 RPM
- Temperature Rating
- 130 Degrees F
- Type
- Grinder Pumps
Zoeller Pump Company 810-0004 Details
This Zoeller Shark Series E810 grinder pump is designed for sewage ejector applications, working to pump raw sewage to the pressurized sewer main. It features a rugged cast iron body with a corrosion-resistant powder-coated epoxy finish to withstand the most demanding sewage ejector applications. Its corrosion- and rust-resistant stainless steel handle, screws, and hardware also provide long-lasting durability in tough conditions.
This pump is easy to use with a simple control panel and control switches. It uses Tri-Slice cutter technology to cut solids into a slurry. This includes 3 independent cutting channels that reduce solids down to 1/8" while providing over 250,000 cuts per minute. Its 1 hp, oil-filled motor operates at a rate of 1,725 RPM, and it comes with auto-reset thermal overload protection. Both the motor and cast iron motor housing provide optimal heat dissipation to prevent overheating.
This grinder pump is factory tested after assembly to ensure efficient operation. It includes a pressure relief valve to prevent damage to your piping system when the pressures in the city main are greater than the pump's PSI rating. It has a 1 1/4" NPT discharge, a max flow rate of 14.6 GPM, and a permanent split capacitor. It also features a temperature rating of 130 degrees Fahrenheit. This grinder pump requires a 230V electrical connection for operation, and it comes with a 20' cord.
Overall Dimensions:
Diameter: 10 3/8"
Height: 24 7/16"
CSA, US and Canada
This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.
Made in America
This item was made in the United States of America.
5-15P
This unit comes with a NEMA 5-15P plug.
Resources and Downloads for
Zoeller Pump Company 810-0004
A PDF viewer is required to view this product's information. Download Adobe Acrobat software