Product Overview
- Durable, all cast iron construction
- Corrosion-resistant, powder-coated epoxy finish
- Submersible and hermetically sealed with automatic reset thermal overload protection
- Has a 1 1/2" NPT discharge, 80 GPM, and oil filled cooling
- Pressure-tested after assembly to ensure efficient operation
Other Products from this Line
- Quantity
- 1/Each
- Shipping Weight
- 38.2 lb.
- Width
- 10 1/8 Inches
- Depth
- 7 7/8 Inches
- Height
- 12 1/8 Inches
- Power Cord Length
- 15 Feet
- Amps
- 10.5 Amps
- Hertz
- 60 Hz
- Phase
- 1 Phase
- Voltage
- 115 Volts
- Color
- Green
- Discharge Size
- 1 1/2 Inches
- Features
- Corrosion-Resistant Made in America
- Finish
- Epoxy
- Flow Rate
- 80 GPM
- Horsepower
- 1/2 HP
- Material
- Cast Iron
- Plug Type
- NEMA 5-15P
- Power Type
- Electric
- RPM
- 3,450 RPM
- Type
- Sump Pumps
Zoeller Pump Company 95-0001 Details
For a professional-grade submersible pump used for light commercial dewatering, turn to this Zoeller Premium Series M95 sump pump. This sump pump features a durable, all cast iron construction with a corrosion-resistant, powder-coated epoxy finish. This M95 model has stainless steel screws, switch arm, guard, and handle and a viton outer switch boot. Plus, there are no sheet metal parts that will rust or corrode and no screens to clog.
This sump pump is submersible and hermetically sealed for smooth operation with an automatic reset thermal overload protected motor. It features upper and lower sleeve bearings running in a bath of oil as well as a carbon and ceramic shaft seal. It also has a watertight, neoprene square ring between the motor and pump housing as well as a solid, buoyant polypropylene float. It's float-operated with a 2-pole mechanical switch that integrates advanced switch technology.
Additionally, this unit features a green Zoeller LED plug, which ensures easy visibility to know exactly when your pump has power. This new LED plug is especially helpful during troubleshooting, eliminating guesswork without requiring professional assistance on-site. Simply check to see if the vibrant green LED plug is lit up; if you can see the light, then you are good to go!
The entire unit is pressure-tested after assembly to ensure efficient operation. Powered by a 1/2 hp motor, this sump pump has a 1 1/2" NPT discharge, a max flow rate of 80 GPM, oil filled cooling, and can pass 1/2" spherical solids. The maximum temperature for effluent or dewatering is 130 degrees Fahrenheit. It requires a 115V electrical connection for operation.
Overall Dimensions:
Width: 10 1/8"
Depth: 7 7/8"
Height: 12 1/8"
Made in America
This item was made in the United States of America.
5-15P
This unit comes with a NEMA 5-15P plug.
Resources and Downloads for
Zoeller Pump Company 95-0001
A PDF viewer is required to view this product's information. Download Adobe Acrobat software