$1,399.00/Each
Ships free with PlusEarn up to $41.97 back (4,197 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Rugged cast iron housing with a corrosion-resistant epoxy-coated finish
- 1 1/2 hp motor operates at a rate of 3,450 RPM
- Requires a piggyback float switch or control panel for operation (sold separately)
- Non-clogging vortex impeller passes 3/4" spherical solids
- Has a 1 1/2" NPT discharge, a max flow rate of 145 GPM, and oil-filled cooling
Other Products from this Line
- Quantity
- 1/Each
- Shipping Weight
- 87.2 lb.
- Width
- 12 3/4 Inches
- Depth
- 10 3/8 Inches
- Height
- 19 5/16 Inches
- Power Cord Length
- 20 Feet
- Amps
- 2.4 - 15.5 Amps
- Hertz
- 60 Hz
- Phase
- 1 - 3 Phase
- Voltage
- 230 Volts
- Color
- Green
- Discharge Size
- 1 1/2 Inches
- Features
- Corrosion-Resistant Made in America
- Finish
- Epoxy
- Flow Rate
- 145 GPM
- Horsepower
- 1 1/2 HP
- Material
- Cast Iron
- Plug Type
- NEMA 5-15P
- Power Type
- Electric
- RPM
- 3,450 RPM
- Temperature Rating
- 130 Degrees F
- Type
- Effluent Pumps
Zoeller Pump Company 186-0004 Details
This Zoeller Flow-Mate Series E186 effluent pump removes effluent or ground water in septic or effluent applications. It features a rugged cast iron motor housing, pump housing, and base. Its housing boasts a corrosion-resistant powder-coated epoxy finish to withstand the most demanding sewage ejector applications. This model also has a corrosion- and rust-resistant stainless steel handle, screws, and hardware for long-lasting durability.
This nonautomatic pump requires a piggyback float switch or control panel for operation (sold separately). Both options let you set the on and off point of the pump in the field. Its 1 1/2 hp, oil-filled motor operates at a rate of 3,450 RPM, and it comes with auto-reset thermal overload protection. Both the motor and cast iron motor housing provide optimal heat dissipation to prevent overheating. This effluent pump also includes a cast iron vortex impeller, which allows solids to pass freely through the pump to prevent clogging.
This effluent pump is factory tested after assembly to ensure efficient operation. It passes 3/4" spherical solids, and it has a 1 1/2" NPT discharge, a max flow rate of 145 GPM, and a permanent split capacitor. It also features a temperature rating of 130 degrees Fahrenheit. This effluent pump requires a 230V electrical connection for operation, and it comes with a 20' cord.
Overall Dimensions:
Width: 12 3/4"
Depth: 10 3/8"
Height: 19 5/16"
Made in America
This item was made in the United States of America.
5-15P
This unit comes with a NEMA 5-15P plug.
Resources and Downloads for
Zoeller Pump Company 186-0004
A PDF viewer is required to view this product's information. Download Adobe Acrobat software