$539.00/Each
Ships free with PlusEarn up to $16.17 back (1,617 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Rugged cast iron housing with a corrosion-resistant epoxy-coated finish
- 1/3 hp motor operates at a rate of 1,725 RPM
- Includes a single piggyback float switch
- Non-clogging vortex impeller passes 1/2" spherical solids
- Withstands intermittent temperatures of up to 200 degrees Fahrenheit
Other Products from this Line
- Quantity
- 1/Each
- Shipping Weight
- 29.6 lb.
- Width
- 10 1/16 Inches
- Depth
- 7 3/4 Inches
- Height
- 10 1/16 Inches
- Power Cord Length
- 15 Feet
- Hertz
- 60 Hz
- Phase
- 1 Phase
- Voltage
- 115 Volts
- Features
- Corrosion-Resistant Made in America
- Finish
- Epoxy Powder-Coated
- Horsepower
- 1/3 HP
- Material
- Cast Iron
- Plug Type
- NEMA 5-15P
- Power Type
- Electric
- RPM
- 1,725 RPM
- Temperature Rating
- 200 Degrees F
- Type
- Effluent Pumps
Zoeller Pump Company 2057-0005 Details
This Zoeller 2000 High-Temperature Series BN2057 effluent pump is designed for applications that require a pump rated for high temperatures. This makes it ideal for hot water transfer, plant wash down, boiler blow down, transformer vaults, and industrial cleaning systems. It features a rugged cast iron switch case, base, motor housing, and pump housing with a corrosion-resistant powder-coated epoxy finish. It also has a corrosion- and rust-resistant stainless steel handle, screws, and hardware for long-lasting durability.
This nonautomatic pump includes a single piggyback float switch for operation. This switch allows you to set the on and off point of the pump in the field. This unit's 1/3 hp oil-filled motor operates at a rate of 1,725 RPM, and it comes with high-temperature thermal overload protection. Its motor and cast iron motor housing provide maximum heat dissipation to prevent overheating. This pump also includes a smooth cast iron vortex impeller, which allows solids to pass freely through the pump to prevent clogging.
This effluent pump is factory tested after assembly to ensure efficient operation. It is designed for light commercial applications, and it withstands intermittent temperatures of up to 200 degrees Fahrenheit. This unit passes 1/2" spherical solids and has a 1 1/2" NPT discharge. It requires a 115V electrical connection for operation, and it comes with a 15' cord.
Overall Dimensions:
Width: 10 1/16"
Depth: 7 3/4"
Height: 10 1/16"
Made in America
This item was made in the United States of America.
5-15P
This unit comes with a NEMA 5-15P plug.
Resources and Downloads for
Zoeller Pump Company 2057-0005
A PDF viewer is required to view this product's information. Download Adobe Acrobat software