Zoeller 131-0001 Drain Pump with M98 Pump - 115V

Zoeller Pump Company 131-0001 Details

Reliably remove water from areas where gravity flow is not available with this Zoeller 131-0001 drain pump. This system comes with an M98 effluent pump. This pump is perfect for preventing flooding after heavy rainfall or storms and removing water anywhere gravity can't, such as bar sinks, laundry trays, or condensate removal.

The effluent pump features a corrosion-resistant, powder-coated epoxy finish over cast iron construction to provide strength and durability. Plus, it has stainless steel screws assembling the seal, arm, handle, and guard to stave off rust and a glass-filled polypropylene base. It can pass spherical solids up to 1/2" in diameter, and the lack of a screen helps keep the unit running smoothly.

The included basin features a polypropylene construction with a 2" NPT vent. It has a 1 1/2" compression slip fit for top and side intake. This basin also has threaded connections and passes the 10' stack test.

This submersible effluent pump features a permanent split capacity motor that's oil filled and hermetically sealed with automatic reset thermal overload protection. This automatic model is temperature rated for 130 degrees Fahrenheit, and it includes a float-operated 2-pole mechanical switch and a non-clogging vortex impeller. It also features upper and lower bearings with oil-fed cast iron as well as a carbon and ceramic shaft seal. Powered by a 1/2 hp motor, this effluent pump has a max flow rate of 72 GPM and a watertight, neoprene square ring between the motor and pump housing. It requires a 115V electrical connection for operation.

M98 Dimensions:
Width: 10 1/8"
Depth: 7 7/8"
Height: 12 1/16"

Basin Dimensions:
Width: 14 1/2"
Height: 12 1/2"