Wesco Industial Products Heavy-Duty Appliance Truck Video

The Wesco heavy-duty appliance truck is the ergonomic solution to lifting and transporting heavy loads. It can be used in either the two or four wheel mode. There are two 10" poly hub main wheels and two 6" poly rear swivel casters. Two webbed cargo belts with ratchet tighteners provide for maximum load security. To use this product, first tilt the truck towards you while at the same time pulling the lever on the left side of the truck. This will release the axle from the storage position to the break over position. With the axle in this position, there is a significant reduction in the amount of effort needed to break over the load. As you break over the load, pull the handle on the right side of the truck to release the kick out carriage. This will allow you to use the truck in the four wheel position and take advantage of the maneuverability made possible by the swivel casters. The Wesco heavy-duty appliance truck is made with 1" diameter steel tubing. It has a 1/4" thick nose plate that is 24" wide by 5" deep and is available in either a 72" or 78" model. It has a capacity of 1800 lb. and is made in our Pennsylvania factory.