How to assemble your chair.

Before beginning assembly, make sure you have all your parts and hardware.

Overview-Parts:

A) Casters. B) Base. C) Mechanism. D) 4 x M8*22 Mechanism Screws. E) Left Arm. F) Right Arm. G) 8 x M6*18 Arm Screws. H) Arm Caps. I) Seat Cushion. J) Gas Lift. K) Back Cushion.

Starting with the base and casters. Begin by flipping the base upside down, then firmly press in each caster until you hear a click.

Flip the base to the upright position.

Next, you'll be working with the gas lift and cover. Firmly insert the gas lift into the base, then place the cover over the gas lift.

Next, locate your seat cushion. The arrow on the mechanism indicates the front of the chair. Using the included M8*22 mechanism screws, hand thread the screws to connect your mechanism to the bottom of your seat cushion. With a Phillips screwdriver firmly tighten each screw in an alternating cross fashion.

Next, we will attach the armrest. Your arms are labeled right and left. Align the screw holes on the armrest with the seat cushion screw holes using the M6*18 arm screws. Do not fully tighten the screws at this point.

Next, align the screw holes on the armrest with the screw holes on the backrest using the M6*18 arm screws. Do not fully tighten the screws at this point.

Flip the chair over and repeat the process to attach the second arm firmly.

Place your seat onto the gas lift.

Now firmly tighten all your screws gradually in an alternating pattern.

Firmly press the arm caps into the screw holes.

Your final step of assembly is to sit on your new chair to firmly engage the mechanism onto the gas left.

You're now ready to enjoy your new office chair.

B7641 Office Chair Assembly Walkthrough Video