Unger: RestroomRX: A Higher Level of Clean.
Assembly and Quickstart: simple steps to start cleaning with your Unger RestroomRX.

Step 1) Unbox your RestroomRX and assemble the cart. Note: You will need a Phillips-head screwdriver or cordless drill with a Phillips-head bit. Screws are provided. Attach bottom panel with 2 screws. (Screw #1 and #2). Attached back support with 1 screw at bottom (Screw #3). Attached middle shelf and secure with 1 screw into back support piece ( Screw #4). Use 2 screws to attach and secure middle shelf to bottom plate (Screw #5 and #6 locations shown). Secure top shelf to middle shelf with 2 screws (Screws #'s 7 and 8). Attach top shelf to the back support piece (Screws #'s 9 and 10)
Step 2) Attach Tool Clips to the Corresponding Holder on the Cart. (mode attaches clips).

Step 3) Attach Tools to the Corresponding Clip.

Step 4) Install Trash receptacle and garbage bag. (The model attaches the receptacle using holes and anchor points in the frame, while the trash bag is secured using clamps). Note: Trash Bag is removed by unzipping the flap at the back of the receptacle - eliminating awkward lifting.

Step 5) Assemble bucket and place on the cart. (The model slides the mop wringer onto the frame and pushes the handle into place, before demonstrating how to use it).

Step 6) Place your mop and you're ready to clean. Unger's award-winning OmniClean now fits on the RestroomRX! Note(s): Toilet bowl brush is designed to eliminate dripping by placing the brush into its receptacle when carrying. Pull out on the grabber to adjust to vertical or horizontal positions. Buckets are easily filled with the Easy Adapter Hose. Buckets are easily emptied two ways: (by tipping using the spout or by unplugging the lower drainage hole).

RestroomRX: A Higher Level of Clean. Unger. Contact us today. www.Ungerglobal.com

How-To: RestroomRx Assembly & Quickstart Video