$259.00/Each
Ships free with PlusContact us or login for pricing
Start a Live Chat(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)
Earn up to $7.77 back (777 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Jumper allows you to choose between two wattages during installation
- Largely insusceptible to scale build-up
- Features exclusive design to prevent dry-firing and a high-limit pressure cutout with manual reset
- High impact polycarbonate plastic housing
- 0.264 GPM minimum water flow to activate unit
- Quantity
- 1/Each
- Shipping Weight
- 9 lb.
- Width
- 8 Inches
- Depth
- 4 5/16 Inches
- Height
- 14 1/8 Inches
- Amps
- 25 - 29.2 Amps
- Hertz
- 60 Hz
- Phase
- 1 Phase
- Voltage
- 120 Volts
- Wattage
- 3 - 3.5 Kilowatts
- Application
- Single Point of Use
- Color
- White
- Flow Rate
- 0.264 GPM
- Installation Type
- Stationary
- Material
- Polycarbonate
- Maximum Pressure
- 145 PSI
- Maximum Temperature
- 149 Degrees F 65 Degrees C
- Power Type
- Electric
- Style
- Tankless
- Type
- Water Heaters
- Usage
- Undercounter
- Water Inlet Size
- 1/2 Inches
Stiebel Eltron 200060 Details
Provide an unlimited supply of hot water with this Stiebel Eltron 200060 DHC Trend tankless electric water heater! Designed for installation at the point of use, this unit is great for a sink at the end of a long pipe run or for multiple low-flow sinks and comes with a jumper that allows you to choose between two wattages during installation to meet your specific needs. The jumper also allows the temperature to be adjusted during installation at 110, 109, 122, or 140 degrees Fahrenheit, and it has a maximum permissible inlet temperature of 149 degrees Fahrenheit. This water heater is largely insusceptible to scale build-up and is suitable for both hard and soft water areas.
Activated by a minimum 0.264 GPM flow rate, it features an exclusive design with a flow sensor that prevents dry-firing and premature failure as well as a high-limit switch with manual reset for optimum safety and peace of mind. Its miniaturized turbine feeds the water flow rate information into the main circuit board. This water heater boasts a high impact polycarbonate plastic housing and an interactive backlit display. Its Direct Coil nichrome heating element is housed in glass-reinforced polyamide heating chamber, which along with the tankless design, heats water instantaneously as it flows through the machine for complete elimination of standby heat loss.
There's no T&P relief valve needed, and this unit can be easily installed with its 1/2" NPT connections and compact, wall-mounted design. Plus, its tankless design prevents bacteria growth. It requires a 120V electrical connection for operation.
Overall Dimensions:
Width: 8"
Depth: 4 5/16"
Height: 14 1/8"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
ETL, US & Canada
This product has been certified by ETL, a division of the Intertek Group, to meet applicable electrical product safety standards required for use in the United States and Canada.
WQA
This item has been tested and certified to water treatment industry standards by the Water Quality Association.
Hardwired
This product must be hardwired by a professional; it does not plug into a standard wall outlet.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Need Parts & Accessories?
Show replacement parts and accessories for Stiebel Eltron 200060 today!
Resources and Downloads for
Stiebel Eltron 200060
A PDF viewer is required to view this product's information. Download Adobe Acrobat software