$393.99/Each

Other Available Colors:

  • Natural color provides visibility for how full the tank is
  • Can be mounted underneath trailer or near portable restrooms
  • Made of heavy-duty plastic
  • 3" fitting that accepts Fernco┬« flexible rubber couplings
  • 250 gallon capacity
Shipping: Usually Ships in 3 Weeks
PolyJohn 250 Gallon Holding Tank

PolyJohn 250 Gallon Holding Tank

Hi there, I'm Jamie and I'm here to show you about one of our products that we carry. This is our 250 gallon holding tank. A capacity of 250 gallons. Its measurements are 72" long 48" wide and 18" tall. It features 6 quarts, 3" quarts, that you can connect a rubber connector to, the middle port comes open from the factory however if you need any of the other ports opened you simply use a 3" hole saw and drill your port out accordingly. Like I was saying, the rubber connectors are readily available, they come in different configurations, this is an elbow, you'll have T's and straight connectors that way you don't have to simply glue your PVC pipes and then cut them down after your rental. These tanks are available in pewter gray but also in a natural color which is a translucent color so you can see the liquid level of your waste. These are primarily used for waste storage. However, they can be used for fresh water storage as well. They are FDA compliant so there is no worry there. This holding tank, like other holding tanks that we carry, can be daisy chained together, meaning they can be hooked up in a series to double or triple their capacity. If you would like any more information regarding this product or any other product that we carry please visit our website. Thank you for your time.

Copy and paste the embed code above.

You can rely on the durability of this PolyJohn holding tank, and the 250 gallon capacity is large enough to suit your needs! Whether needed at a work site or a large event, this holding tank will get the job done.

PolyJohn HT01-0250N Specs
Length 72 Inches
Width 48 Inches
Height 18 Inches
Capacity 250 Gallons
Color Beige
Made in America Yes
Type Holding Tanks

PolyJohn HT01-0250N Details

Complete your portable restroom area with this PolyJohn HT01-0250N natural 250 gallon holding tank. This discrete holding tank provides a sanitary receptacle for your portable restroom where indoor plumbing is not available. This holding tank can be used for above ground waste storage or fresh water storage. It is manufactured using a linear low-density polyethylene, hexane copolymer resin, making it an extremely durable option for long-term waste storage. This resin material has excellent processabilities, outstanding dimensional control, low warpage, excellent environmental stress crack resistance (ESCR), and long-term, ultraviolet (UV) stabilization. It's the heavy-duty solution to keeping waste safely contained without the threat of cracks, leaks, or spills. The large capacity makes it perfect for use in a portable restroom with long-term storage, and a 1/4" nominal wall thickness guarantees dependability. Additionally, its FDA food grade compliant resin and pigment makes it a safe storage solution, while the natural color allows you to see the current level of the waste inside, as required in certain states.

This holding tank has a 3" fitting to connect it to a portable restroom. It eliminates the use of threaded and solvent-cemented conventional plumbing fittings - which are usually discarded after each use - by utilizing Fernco® flexible rubber couplings instead. Fernco® couplings are manufactured from tough, elastomeric polyvinyl chloride (PVC) and are unaffected by soil conditions. They are reusable and resistant to chemicals, UV rays, fungus growth, and normal sewer gasses. The clamps, band screw, and housing are all made from 300 series stainless steel. Typically, the distance from the holding tank to the restroom / sink is around 3 - 6 feet, but this could vary depending on the slope of the tank. To clean / pump out your unit, it is recommended to seek out a service contractor. This tank must be monitored to know when it needs service.

This tank's specialized design means it can be used with many of PolyJohn's portable restrooms or sinks. It even has a discrete appearance perfect for use around portable restrooms or portable wash stations. Regardless of whether it is used underneath a trailer, outside of a portable restroom, or beside a portable wash station, this holding tank is sure to give you a convenient and discrete way to store waste.

PolyJohn sets the standard for the sanitation industry and is the leading manufacturer of portable restrooms. Their products are made for high traffic areas such as commercial worksites, festivals, and fairs. Most importantly, each PolyJohn is designed to be easy to clean and maintain. Regardless of where you need them, PolyJohn's products are built to withstand years of use.

Overall Dimensions:
Length: 72"
Width: 48"
Height: 18"
Capacity: 250 gallons

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents: Prop 65 Warning

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
PolyJohn HT01-0250N

Specsheet Specsheet

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register