Luxor AVJ42KBDL Adjustable Height Black A/V Cart with Keyboard Shelf and Drop Leaf Shelves

Luxor assembly instructions for the adjustable height metal cart. You will need a screwdriver and scissors to complete the process. Step 1: Remove the warning tag. Make sure to review all information on the tag before proceeding. Step 1a: Take top shelf of metal cart and flip it and do same with drop leaves (Bx2) making sure mounting surface is facing towards side of top shelf. Step 1b: Take spacer plates (Ax2) and install screws (Cx2) into them - then install this assemble into screw holes on inside of top shelf. Make sure to tighten with a screwdriver and a wrench. Step 1d: Repeat the same process for the other side's drop leaf shelf. Step 1e: Take two spacer plates (Ax2) and install screws (Cx2) into them and place through inside of screw holes on top shelf. Step 1f: Attach the other drop shelf (B) onto the screws. Step 1g: Fasten hex nuts (Dx2) onto screws (Cx2) tightening with a screwdriver and a wrench. Step 2a: Flip the top shelf on its side. Step 2b: Push screws (Ax2) through screw holes on top shelf. This is the front edge of the pullout brackets used for the keyboard shelf. Place bracket (FL) so that front edge is facing toward front side of top shelf (front side has logo on it). Step 2c: Place bracket (FL) onto screws (Ax2) and fasten with nuts (Cx2). Step 2d: Fasten hex nuts (Dx2) onto screws (Cx2) tightening with a screwdriver and a wrench. Repeat this for ride side bracket (FR). Install screws (A x 2) into screw holds on top shelf. Step 3a: Flip top shelf so that front is down and facing toward pullout shelf (H). Step 3b: Align pullout shelf (H) so that runner snaps into place on (FL & FR) brackets. Push shelf firmly into place. The shelf should then slide evenly and smoothly. Step 4a: Flip cabinet box (B) so that caster holes are facing up. Step 4b: Install non-locking casters (Cx2) into back side of cabinet (B). Hammer into place with a rubber mallet. Rotate the cabinet assembly so front of cabinet is facing towards you. Step 4c: Install locking casters (Cx2) into front side of cabinet (B). Hammer into place with a rubber mallet. Step 5a: Flip cabinet unit on its side. Step 5b: Open (unlock) door to get access to inside of cabinet. Step 6a: Install top shelf (A) into bottom cabinet pack (B) so that unit is at a desired height. Step 6b: Install screw (D) on outside of unit, then fasten locking nut (E) with screwdriver and wrench. Repeat this process for all four corners. Step 7: Flip unit right-side up. Drop leaf shelves swivel up and hinge. Lock into place. Rotate unit so back is accessible. Step 8a: Unscrew wing nuts (Dx2) from screws (Cx2). Step 8b: Align power strip (A) so that mounting holes line up with bracket (B) holes. Step 8c: Insert screws (Cx2) into mounting holes of power strip (A) and through cord wrap (B). Step 8d: Install electrical assembly onto mounting holes on back of top shelf. Step 8e: Fasten wing nuts (Dx2) onto screw holes (Cx2) inside of top shelf. Wrap cord tighly around cord wrap (B) when unit's outlets are not in use or anytime unit needs to be moved. Make sure to unlock the locking casters any time unit needs to be moved. Step 9: Install non-slip mat onto top shelf. Assembly complete!