$553.98/Each

Ships free with Plus

for details

Earn up to $16.62 back (1,662 points)with a Webstaurant Rewards Visa® Credit Card

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Includes a 4/10 hp sewage pump and basin to collect sewage, drainage, and water seepage
  • Features an integrated anti-floatation collar
  • Durable roto-molded polyethylene basin
  • No internal moving parts helps eliminate hang-ups
  • Recessed discharge and vent reduces the risk of damage
UPC Code:400017071060

Little Giant Pumps 509673 Specs

Quantity
1/Each
Shipping Weight
68.5 lb.
Width
8 5/8 Inches
Depth
10 7/16 Inches
Height
13 5/8 Inches
Power Cord Length
20 Feet
Amps
8 Amps
Hertz
60 Hz
Phase
1 Phase
Voltage
115 Volts
Wattage
870 Watts
Capacity
47 Gallons
Color
Green
Discharge Size
2 Inches
Features
Made in America
Finish
Epoxy
Flow Rate
100 GPM
Horsepower
4/10 HP
Material
Cast Iron  Polyethylene
Maximum Pressure
9.5 PSI
Maximum Suction Lift
20 Feet
Maximum Temperature
140 Degrees F
Motor Type
PSC
Plug Type
NEMA 5-15P
Power Type
Electric
Type
Sewage Pumps

Little Giant Pumps 509673 Details

This Little Giant Pit+Plus JR sewage pump basin system is perfect for collecting and removing sewage, drainage, and water seepage. The durable roto-molded polyethylene basin is built to last and is ideal in situations where the unit may be exposed to corrosive elements. With a 47 gallon capacity, this basin can accommodate a large amount of water before needing to be emptied. Additionally, this unit can sustain a maximum water temperature of 135 degrees Fahrenheit. The basin's radial rib design and monolithic top enhance its strength to ensure that it will not collapse or crack under pressure. The basin has a recessed discharge and vent, which reduces the risk of damage to the system. Better yet, there are no internal moving parts, which eliminates system failure due to hang-ups.

Made with an epoxy-coated cast iron base and body with stainless steel fasteners for long life and durability, this pump is designed for continuous use. It's ideal for removing effluent gray water or wastewater and can handle solids up to 2". The 4/10 hp PSC (permanent split capacitor) motor has 2" FNPT discharge, produces a maximum flow rate of 100 GPM at a height of 5 feet, and reaches a maximum shut-off of 20 feet. The unit features a nitrile seal with carbon and ceramic faces and a nylon impeller. It requires a 115V electrical connection and includes a 20 foot cord.

The basin's finish cover is functional while also enhancing the aesthetic of the unit. It also features a convenient access cover that allows for easy maintenance and molded anti-torque stops to prevent the pump from spinning and tangling the cords. This unit also comes with switch cord grips and locators to allow you to control the direction of the cord, and it also helps to prevent the switch from being knocked out of place by the pump. The unit is equipped with a float switch that uses a bell inside the basin to monitor liquid levels for convenient operation of the switch. The switch is isolated from the liquid to prevent switch failure. The 360-degree molded handle helps make it easier to install and empty the basin. Plus, this system comes pre-assembled for added convenience. For reliable collection of sewage and water, this sewage pump basin system is an excellent choice!

Basin Dimensions:
Top Diameter: 24"
Bottom Diameter: 22 5/8"
Height: 26 9/16"
Capacity: 47 gallons

Pump Dimensions:
Width: 8 5/8"
Depth: 10 7/16"
Height: 13 5/8"

Attention CA Residents:
  • Made in America

    Made in America

    This item was made in the United States of America.

  • CSA, US

    CSA, US

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in the United States.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Little Giant Pumps 509673

A PDF viewer is required to view this product's information. Download Adobe Acrobat software