Encore KL50-Y027 Pre-Rinse Button Spray Valve

A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).

Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM

These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.

Sometimes, factors like the voltage, fuel type, and serial number may determine whether or not a particular part will fit your particular unit. We do our best to provide the most up-to-date information possible on our site but we cannot guarantee that this will clarify every possible scenario. If you require additional confirmation that this part is the correct one for your unit, we recommend consulting manufacturer literature and resources for your equipment to verify the correct part.

Yes. This is an OEM (Original Equipment Manufacturer) part.

An OEM part is the original component that was made for your equipment.

We also sell parts that are equivalent to OEM products, but are not genuine OEM. Each type has its own merits – these are some things to consider when making the decision between OEM and OEM-equivalent parts:

• Using an OEM part guarantees that you will comply with any valid manufacturer’s warranties and agency approvals on your product. An OEM-equivalent part may or may not offer the same guarantees.

• OEM-equivalent parts are built to the same specifications as the original part and are often available at a lower price point. In some cases it may even be sourced from the same location as the OEM part, though this will vary from item to item.