Quick Shipping

Usually ships in 1 business day

Product Overview

  • Handle labeled with red and blue temperature indicators
  • Spout rotates 360 degrees for versatility
  • Meets ADA & ICC A117.1, ASME A112.18.1/CSA B125.1, NSF 61, and NSF 372 compliance
  • Requires 3 faucet holes for installation
  • Includes low flow features to save water
UPC Code:LK1000CR

Zurn Elkay LK1000CR Specs

Quantity
1/Each
Shipping Weight
2.72 lb.
Spout Length
8 Inches
Faucet Width
10 Inches
Faucet Height
7 1/2 Inches
Cartridge Type
Ceramic
Faucet Centers
Single
Features
ADA Compliant  NSF Listed
Finish
Chrome
Flow Rate
1.5 GPM
Handle Type
Lever
Material
Brass
Mounting Style
Deck Mounted
Mounting Type
Adjustable
Rough In
Single
Spout Clearance
5 Inches
Spout Type
Swing
Sprayer
Without Sprayer
Type
Faucets
Water Inlet Size
3/8 Inches

Zurn Elkay LK1000CR Details

Install a convenient and useful water fixture in your business with the Zurn Elkay LK1000CR Everyday deck mount chrome kitchen faucet with lever handle and deck plate! This heavy-duty faucet features a fully rotating spout that can be used at any angle for versatility. The spout provides an excellent 8" reach for ease of use. The lever handle with deck plate requires three faucet holes for installation, and is labeled with red and blue temperature indicators for both easy identification and as a safety precaution. Plus, it is made with a durable brass material with a sleek chrome finish that is easy to clean.

This deck mount faucet meets ADA compliance. It is designed for countertops with a maximum thickness of 2 1/2", while the low flow water features provide a steady stream that will save your business water.

Overall Dimensions:
Spout Length: 8"
Faucet Height: 7 1/2"
Faucet Width: 10"

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • 3/8" Water Connection

    3/8" Water Connection

    This unit comes with a 3/8" water connection for water supply.

  • IAPMO R&T, UPC Certified - USA

    IAPMO R&T, UPC Certified - USA

    This product is certified by the International Association of Plumbing and Mechanical Officials (IAPMO) to meet Uniform Plumbing Code (UPC) standards for the USA

  • NSF/ANSI 61 & 372

    NSF/ANSI 61 & 372

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Resources and Downloads for
Zurn Elkay LK1000CR

A PDF viewer is required to view this product's information. Download Adobe Acrobat software