$298.49/Each
Ships free with PlusEarn up to $8.95 back (895 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Durable metal construction with attractive arctic stainless finish
- Provides a flow of 1.8 GPM
- Diamond-coated ceramic valve cartridges ensure a leak-free performance
- Includes a 20" long pull-down spray wand with MagnaTite Docking and ShieldSpray mode
- Swing gooseneck spout rotates a full 360 degrees
- Quantity
- 1/Each
- Shipping Weight
- 7.2 lb.
- Spout Length
- 9 3/16 Inches
- Faucet Width
- 2 9/16 Inches
- Faucet Height
- 14 7/8 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 8 Single Inch
- Features
- ADA Compliant Flex Inlets Included Made in America With Sprayer
- Finish
- Stainless Steel
- Flow Rate
- 1.8 GPM
- Handle Type
- Lever
- Material
- Metal
- Mounting Style
- Deck Mounted
- Pressure Rating
- 60 PSI
- Spout Clearance
- 7 1/4 Inches
- Spout Type
- Gooseneck
- Type
- Faucets
- Water Inlet Size
- 3/8 Inches
DELTA FAUCET COMPANY 9178-AR-DST Details
This Delta Faucet Leland 1.8 GPM deck-mount faucet is the perfect addition to your commercial kitchen! Boasting a durable metal construction and attractive arctic stainless finish, it's sure to last in your establishment for years to come. This faucet features a sleek lever handle with color-coded markings, and it provides an efficient water flow of 1.8 GPM, helping to save water while still providing a consistent, effective flow of water. It's also made with dual integral check valves in the sprayer, Quick Snap connect hoses, and Touch-Clean rubber spray holes that wipe away build-up with the touch of a finger!
Built with DIAMOND Seal technology, this faucet has diamond-coated ceramic valve cartridges that help to ensure a leak-free performance. Simple to install, this design also eliminates wear on seals and keeps water free of metal contaminants. This faucet utilizes one to four holes and 8" centers for deck-mount installation with the included escutcheon, and it comes with integrated, one-piece InnoFlex PEX supply lines that are crack-, kink-, and corrosion-resistant for ultimate peace of mind. It also includes a 20" long pull-down spray wand that allows you to toggle between a spray, aerated stream, or ShieldSpray mode, which provides a concentrated jet surrounded by a shield of water that contains splatters for powerful cleaning without the mess. When you're done using the wand head, a strong MagnaTite Docking magnet snaps it back into place so it doesn't droop over time. Plus, the swing gooseneck spout conveniently rotates a full 360 degrees!
Overall Dimensions:
Spout Length: 9 3/16"
Faucet Height: 14 7/8"
Faucet Width: 2 9/16"
Customer questions about this product
Does this item have any additional agency approvals and certifications?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Made in America
This item was made in the United States of America.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
3/8" Water Connection
This unit comes with a 3/8" water connection for water supply.
Resources and Downloads for
DELTA FAUCET COMPANY 9178-AR-DST
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources