$222.49/Each

Ships free with Plus

Earn up to $6.67 back (667 points)with a Webstaurant Rewards Visa® Credit Card

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Durable metal construction with attractive chrome finish
  • Provides a flow of 1.8 GPM
  • Diamond-coated ceramic valve cartridges ensure a leak-free performance
  • Includes a 20" long pull-down spray wand with MagnaTite Docking
  • Swing gooseneck spout rotates a full 360 degrees
UPC Code:034449787031

DELTA FAUCET COMPANY 9113-DST Specs

Quantity
1/Each
Shipping Weight
6.6 lb.
Spout Length
9 3/8 Inches
Faucet Width
2 1/2 Inches
Faucet Height
15 3/4 Inches
Cartridge Type
Ceramic
Faucet Centers
8 Single Inch
Features
ADA Compliant  Flex Inlets Included  Made in America  With Sprayer
Finish
Chrome
Flow Rate
1.8 GPM
Handle Type
Lever
Material
Metal
Mounting Style
Deck Mounted
Pressure Rating
60 PSI
Spout Clearance
8 3/4 Inches
Spout Type
Gooseneck
Type
Faucets
Water Inlet Size
3/8 Inches

DELTA FAUCET COMPANY 9113-DST Details

This Delta Faucet Essa 1.8 GPM deck-mount faucet is the perfect addition to your commercial kitchen! Boasting a durable metal construction and attractive chrome finish, it's sure to last in your establishment for years to come. This faucet features a sleek lever handle with color-coded markings, and it provides an efficient water flow of 1.8 GPM, helping to save water while still providing a consistent, effective flow of water. It's also made with dual integral check valves in the sprayer and Touch-Clean rubber spray holes that wipe away build-up with the touch of a finger!

Built with DIAMOND Seal technology, this faucet has diamond-coated ceramic valve cartridges that help to ensure a leak-free performance. Simple to install, this design also eliminates wear on seals and keeps water free of metal contaminants. This faucet utilizes a single hole or 8" centers for deck-mount installation with the included escutcheon, and it comes with integrated, one-piece InnoFlex PEX supply lines that are crack-, kink-, and corrosion-resistant for ultimate peace of mind. It also includes a 20" long pull-down spray wand that allows you to toggle between a spray or aerated stream. When you're done using the wand head, a strong MagnaTite Docking magnet snaps it back into place so it doesn't droop over time. Plus, the swing gooseneck spout conveniently rotates a full 360 degrees!

Overall Dimensions:
Spout Length: 9 3/8"
Faucet Height: 15 3/4"
Faucet Width: 2 1/2"

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • 3/8" Water Connection

    3/8" Water Connection

    This unit comes with a 3/8" water connection for water supply.

Resources and Downloads for
DELTA FAUCET COMPANY 9113-DST

A PDF viewer is required to view this product's information. Download Adobe Acrobat software