Quick Shipping

Usually ships in 1 business day

Product Overview

  • Durable brass construction with attractive chrome finish
  • Provides a flow of 1.2 GPM
  • Lever handle features color-coded markings
  • Comes with a lift rod hold plug
  • Includes a pop-up drain
UPC Code:034449747233

DELTA FAUCET COMPANY 559LF-PP Specs

Quantity
1/Each
Shipping Weight
3.4 lb.
Spout Length
4 13/16 Inches
Faucet Width
1 11/16 Inches
Faucet Height
5 7/8 Inches
Cartridge Type
Ceramic
Faucet Centers
Single
Features
ADA Compliant  Flex Inlets Included  With Drain
Finish
Chrome
Flow Rate
1.2 GPM
Handle Type
Lever
Material
Brass
Mounting Style
Deck Mounted
Pressure Rating
60 PSI
Spout Clearance
2 5/8 Inches
Spout Type
Cast
Type
Faucets
Water Inlet Size
3/8 Inches

DELTA FAUCET COMPANY 559LF-PP Details

This Delta Faucet 1.2 GPM deck-mount lavatory faucet is the perfect addition to your commercial restroom! Boasting a durable brass construction and attractive chrome finish, it's sure to last in your establishment for years to come. This faucet features a sleek lever handle with color-coded markings, and it provides an efficient water flow of 1.2 GPM, helping to save water while still providing a consistent, effective flow of water.

This faucet has a ceramic disc valve cartridge with temperature limiter that helps to ensure smooth, reliable operation. It utilizes a single hole for deck-mount installation, and it comes with threaded studs and a lift rod hold plug. It also includes a pop-up drain with plated flange and stopper to prevent items from getting stuck in the drain pipe.

Overall Dimensions:
Spout Length: 4 13/16"
Faucet Height: 5 7/8"
Faucet Width: 1 11/16"

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • EPA WaterSense

    EPA WaterSense

    This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.

  • 3/8" Water Connection

    3/8" Water Connection

    This unit comes with a 3/8" water connection for water supply.

Resources and Downloads for
DELTA FAUCET COMPANY 559LF-PP

A PDF viewer is required to view this product's information. Download Adobe Acrobat software