$98.99/Each

This product is no longer available. We've left this page up for reference only.

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Durable, cast brass construction and polished chrome finish
  • 1/2" NPSM supply inlets
  • Control water flow and prevent leaks with the ceramic 1/4-turn operating cartridges
  • Vandal-proof 2 3/8” lever handles are color coded for easy identification
  • Wall-mounted design
UPC Code:611943552732

Chicago Faucet Company W4W-LES369AB Specs

Quantity
1/Each
Shipping Weight
2.55 lb.
Faucet Width
8 3/4 Inches
Cartridge Type
Ceramic
Faucet Centers
4 Inches
Finish
Chrome
Handle Type
Lever
Material
Brass
Mounting Style
Wall Mounted
Mounting Type
Workboard
Type
Bases
Water Inlet Size
1/2 Inches

Chicago Faucet Company W4W-LES369AB Details

Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets wall-mounted spoutless faucet with 4" centers and 2 3/8" lever handles. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance.

It boasts 4" fixed centers that allow it to match the centers on your sink or mounting surface with ease. Control water flow and prevent leaks with the help of the ceramic 1/4-turn operating cartridges. The hot and cold, vandal-proof 2 3/8" lever handles are color coded for easy identification. The wall-mounted design and 1/2" NPSM supply inlets make this model easy to install. Compatible spouts are sold separately.

Attention CA Residents:

Customer questions about this product

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • ICC-ES Low Lead NSF/ANSI 372

    ICC-ES Low Lead NSF/ANSI 372

    This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.

  • U.S. Green Building Council (USGBC)

    U.S. Green Building Council (USGBC)

    This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.

  • ICC-ES Drinking Water NSF/ANSI 61, Section 9

    ICC-ES Drinking Water NSF/ANSI 61, Section 9

    This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
Chicago Faucet Company W4W-LES369AB

A PDF viewer is required to view this product's information. Download Adobe Acrobat software