$136.49/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- Durable, cast brass construction and polished chrome finish
- Stylish 3 5/8" gooseneck spout
- Pressure compensating Softflo aerator releases a soft, non-splashing flow of water at 1.5 GPM
- Vandal-proof 2 3/8” lever handles are color-coded for easy identification
- Control water flow and prevent leaks with the help of the ceramic 1/4-turn operating cartridges
- Quantity
- 1/Each
- Shipping Weight
- 3.22 lb.
- Spout Length
- 3 5/8 Inches
- Faucet Width
- 8 3/4 Inches
- Faucet Height
- 9 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 4 Inches
- Finish
- Chrome
- Flow Rate
- 1.5 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Wall Mounted
- Mounting Type
- Workboard
- Pressure Rating
- 125 PSI
- Rough In
- 4 Inches
- Spout Clearance
- 6 1/4 Inches
- Spout Type
- Gooseneck
- Temperature Rating
- 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
Chicago Faucet Company W4W-GN1AE35-369AB Details
Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets 1.5 GPM wall-mounted faucet with 4" fixed centers, 3 5/8" gooseneck spout, and 2 3/8" lever handles. Designed with a 3 5/8" gooseneck spout, this faucet combines functionality with style. This unit is equipped with a pressure compensating Softflo aerator that releases a soft, non-splashing flow of water at 1.5 GPM. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance.
It boasts 4" fixed centers that allow it to match the centers on your sink or mounting surface with ease. Control water flow and prevent leaks with the help of the ceramic 1/4-turn operating cartridges. The hot and cold, vandal-proof 2 3/8" lever handles are color coded for easy identification. Prevent water pollution with the help of the 1/2" NPSM supply inlets. The wall-mounted design makes this model easy to install.
Overall Dimensions:
Spout Length: 3 5/8"
Faucet Height: 9"
Faucet Width: 8 3/4"
Customer questions about this product
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Why are the dimensions in the title different from the actual dimensions in the description?
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
EPA WaterSense
This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.
ICC-ES Low Lead NSF/ANSI 372
This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.
U.S. Green Building Council (USGBC)
This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.
ICC-ES Drinking Water NSF/ANSI 61, Section 9
This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.
CalGreen Compliant
This product is compliant with California's CalGreen Green Building Standards Code.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
Chicago Faucet Company W4W-GN1AE35-369AB
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources