Name: Chicago Faucets 895-LESAB Deck-Mounted Spoutless Faucet with 4" Fixed Centers and 2 3/8" Lever Handles
Brand: Chicago Faucet Company
SKU: 857895LESAB
Price: 218.49 USD
Availability: LimitedAvailability

A silver Chicago Faucets deck-mounted faucet base with two lever handles.

Only

$218.49/Each

Ships free with Plus

Earn up to $6.55 back (655 points)with a Webstaurant Rewards Visa® Credit Card

Special Order Shipping

An estimated delivery date will be provided after placing the order

Product Overview

Durable, cast brass construction and polished chrome finish
Quaturn compression operating cartridges control water flow and prevent leaks
Vandal-proof 2 3/8" lever handles are color coded for easy identification
Quick, hassle-free installation
Compatible spouts are sold separately

UPC Code:611943582876

View all Chicago Faucet Company Faucet Bases

Quantity: 1/Each
Shipping Weight: 4.75 lb.
Faucet Width: 8 3/4 Inches
Cartridge Type: Compression
Faucet Centers: 4 Inches
Finish: Chrome
Handle Type: Lever
Material: Brass
Mounting Style: Deck Mounted
Mounting Type: Workboard
Type: Bases
Water Inlet Size: 1/2 Inches

Chicago Faucet Company 895-LESAB Details

Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets deck-mounted spoutless faucet with 4" fixed centers and 2 3/8" lever handles. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance.

It boasts 4" fixed centers that allow it to match the centers on your sink or mounting surface with ease. Control water flow and prevent leaks with the help of the Quaturn compression operating cartridges. The hot and cold, vandal-proof 2 3/8" lever handles are color coded for easy identification. The deck-mounted design is easy to install, and it uses 1/2" NPSM supply inlet and a coupling nut suitable for 3/8" or 1/2" risers. Compatible spouts are sold separately.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

Buy American Act Compliant
This product complies with the provisions of the Buy American Act.
U.S. Green Building Council (USGBC)
This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
ICC-ES Low Lead NSF/ANSI 372
This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.