Quick Shipping

Usually ships in 1 business day

Product Overview

  • Durable, cast brass construction and polished chrome finish
  • Dual-screen outlet releases a steady flow of water at 1.55 GPM
  • Coated metal handle with locking clip
  • Single-hole, deck-mounted design
  • 1/2" NPT male inlet with deck flange
UPC Code:611943537791
View all Chicago Faucet Company Glass Filler Faucet Parts and Accessories

Chicago Faucet Company 712-ABCP Specs

Quantity
1/Each
Shipping Weight
2.97 lb.
Length
4 Inches
Height
11 1/4 Inches
Flow Rate
1.55 GPM
Installation Type
Deck Mounted
Material
Brass
PSI
20 - 125 PSI
Temperature Range
40 - 140 Degrees F
Type
Glass Fillers
Water Inlet Size
1/2 Inches

Customer questions about this product

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

Chicago Faucet Company 712-ABCP Details

Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets 7 7/8" deck-mounted glass filler. It is equipped with a dual-screen outlet that releases a steady flow of water at 1.55 GPM. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance.

With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety. The coated metal handle with locking clip makes it easy to fill your glasses. This single-hole, deck-mounted design and 1/2" NPT male inlet with deck flange make this model easy to install.

Overall Dimensions:
Length: 4"
Height: 11 1/4"

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • ICC-ES Low Lead NSF/ANSI 372

    ICC-ES Low Lead NSF/ANSI 372

    This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.

  • U.S. Green Building Council (USGBC)

    U.S. Green Building Council (USGBC)

    This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.

  • ICC-ES Drinking Water NSF/ANSI 61, Section 9

    ICC-ES Drinking Water NSF/ANSI 61, Section 9

    This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
Chicago Faucet Company 712-ABCP

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Resources

  • How to Choose the Right Faucet

    • Find Related Products

    2 gallon glass jars   5 gallon glass jars   8 burner stove   8 oz bowls   8 qt mixer   gallon glass pitcher