$194.49/Each
Ships free with PlusEarn up to $5.83 back (583 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Durable, cast brass construction and polished chrome finish
- Stylish 3 1/2" rigid / swing gooseneck spout
- Pressure compensating Softflo aerator that releases a soft, non-splashing flow of water at 1.5 GPM
- Control water flow and prevent leaks with the ceramic 1/4-turn operating cartridges
- Vandal-proof 2 3/8” lever handles are color coded for easy identification
- Quantity
- 1/Each
- Shipping Weight
- 5.75 lb.
- Spout Length
- 3 1/2 Inches
- Faucet Width
- 12 5/8 Inches
- Faucet Height
- 9 1/8 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 8 Inches
- Finish
- Chrome
- Flow Rate
- 1.5 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Wall Mounted
- Mounting Type
- Adjustable
- Pressure Rating
- 125 PSI
- Rough In
- 8 Inches
- Spout Clearance
- 6 3/8 Inches
- Spout Type
- Gooseneck
- Temperature Rating
- 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
Chicago Faucet Company 640-GN1AE35-369YAB Details
Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets wall-mounted faucet with adjustable centers, 3 1/2" rigid / swing gooseneck spout, and ceramic operating cartridges. Designed with a 3 1/2" rigid / swing gooseneck spout, this faucet combines functionality with style. This unit is equipped with a pressure compensating Softflo aerator that releases a soft, non-splashing flow of water at 1.5 GPM. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance.
It boasts an 8" body, adjustable arms, and 6 1/4" to 9 3/4" adjustable centers that allow it to match the centers on your sink or mounting surface with ease. Control water flow and prevent leaks with the help of the ceramic 1/4-turn operating cartridges. The hot and cold, vandal-proof 2 3/8" lever handles are color coded for easy identification. Prevent water pollution with the help of the 1/2" NPT female thread inlet. The wall-mounted design and 7/8" offset inlet supply arm make this model easy to install.
Overall Dimensions:
Spout Length: 3 1/2"
Faucet Height: 9 1/8"
Faucet Width: 12 5/8"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
U.S. Green Building Council (USGBC)
This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
Buy American Act Compliant
This product complies with the provisions of the Buy American Act.
EPA WaterSense
This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.
ICC-ES Drinking Water NSF/ANSI 61, Section 9
This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
Chicago Faucet Company 640-GN1AE35-369YAB
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources