$102.49/Each

This product is no longer available. We've left this page up for reference only.

Special Order Shipping

An estimated delivery date will be provided after placing the order

Product Overview

  • Durable, cast brass construction and polished chrome finish
  • Stylish 8" rigid / swing gooseneck spout
  • Pressure compensating Softflo aerator releases a soft, non-splashing flow of water at 1.5 GPM
  • 1/2" NPSM supply inlets and a coupling nut for 3/8" or 1/2" flexible risers
  • Deck-mounted design is easy to install
UPC Code:611943490263

Chicago Faucet Company 626-GN8AE35ABCP Specs

Quantity
1/Each
Shipping Weight
2.13 lb.
Spout Length
8 Inches
Spout Height
12 1/4 Inches
Features
Made in America
Finish
Chrome
Flow Rate
1.5 GPM
Material
Brass
Spout Clearance
6 5/8 Inches
Spout Type
Gooseneck
Type
Nozzles

Chicago Faucet Company 626-GN8AE35ABCP Details

Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets deck-mounted 8" rigid / swing gooseneck remote spout. Designed with an 8" rigid / swing gooseneck spout, this model combines functionality with style. This unit is equipped with a pressure compensating Softflo aerator that releases a soft, non-splashing flow of water at 1.5 GPM.

With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance. It has 1/2" NPSM supply inlets and a coupling nut for 3/8" or 1/2" flexible risers. This model's deck-mounted design is easy to install.

Overall Dimensions:
Spout Length: 8"
Spout Height: 12 1/4"
Spout Clearance: 6 5/8"

Attention CA Residents:

Customer questions about this product

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • EPA WaterSense

    EPA WaterSense

    This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.

  • U.S. Green Building Council (USGBC)

    U.S. Green Building Council (USGBC)

    This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.

  • ICC-ES Low Lead NSF/ANSI 372

    ICC-ES Low Lead NSF/ANSI 372

    This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.

  • ICC-ES Drinking Water NSF/ANSI 61, Section 9

    ICC-ES Drinking Water NSF/ANSI 61, Section 9

    This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.

  • Buy American Act Compliant

    Buy American Act Compliant

    This product complies with the provisions of the Buy American Act.

  • CalGreen Compliant

    CalGreen Compliant

    This product is compliant with California's CalGreen Green Building Standards Code.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Chicago Faucet Company 626-GN8AE35ABCP

A PDF viewer is required to view this product's information. Download Adobe Acrobat software