Quick Shipping

Usually ships in 1 business day

Product Overview

  • Durable, cast brass construction and polished chrome finish
  • Stylish 8" rigid / swing gooseneck spout
  • Pressure compensating Softflo aerator that releases a soft, non-splashing flow of water at 1.5 GPM
  • Vandal-proof 2 3/8” lever handle
  • Quaturn compression operating cartridge and ceramic operating cartridge with hot water limit stop

Shipping Restrictions

This item cannot ship to CA
UPC Code:611943487683

Chicago Faucet Company 350-GN8AE35ABCP Specs

Quantity
1/Each
Shipping Weight
3 lb.
Spout Length
8 7/8 Inches
Faucet Height
14 Inches
Cartridge Type
Compression
Faucet Centers
Single
Finish
Chrome
Flow Rate
1.5 GPM
Handle Type
Lever
Material
Brass
Mounting Style
Deck Mounted
Mounting Type
Adjustable
Pressure Rating
20 - 125 PSI
Rough In
Single
Spout Clearance
8 7/8 Inches
Spout Type
Gooseneck
Sprayer
Without Sprayer
Temperature Rating
40 - 140 Degrees F
Type
Faucets
Water Inlet Size
1/2 Inches

Chicago Faucet Company 350-GN8AE35ABCP Details

Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets deck-mounted single-hole single-supply manual sink faucet with 8" rigid / swing gooseneck spout and vandal-proof 2 3/8" lever handle. Designed with an 8" rigid / swing gooseneck spout, this faucet combines functionality with style. This unit is equipped with a pressure compensating, Softflo aerator that releases a soft, non-splashing flow of water at 1.5 GPM. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety.

Control water flow and prevent leaks with the help of the Quaturn compression operating cartridge. This model has a single hole for deck mounting, and it uses 1/2" NPSM supply inlets and a coupling nut suitable for 3/8" or 1/2" risers.

Overall Dimensions:
Spout Length: 8 7/8"
Faucet Height: 14"

Attention CA Residents:

Customer questions about this product

I live in California. Can I purchase this product?

This product cannot be shipped to California.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • EPA WaterSense

    EPA WaterSense

    This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.

  • U.S. Green Building Council (USGBC)

    U.S. Green Building Council (USGBC)

    This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.

  • ICC-ES ASME A112.18.1/CSA B125.1

    ICC-ES ASME A112.18.1/CSA B125.1

    This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.

  • ICC-ES Low Lead NSF/ANSI 372

    ICC-ES Low Lead NSF/ANSI 372

    This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.

  • ICC-ES Drinking Water NSF/ANSI 61, Section 9

    ICC-ES Drinking Water NSF/ANSI 61, Section 9

    This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.

  • Buy American Act Compliant

    Buy American Act Compliant

    This product complies with the provisions of the Buy American Act.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
Chicago Faucet Company 350-GN8AE35ABCP

A PDF viewer is required to view this product's information. Download Adobe Acrobat software