$164.49/Each
Ships free with PlusProduct Overview
- Durable, cast brass construction and polished chrome finish
- Releases a steady flow of water at 0.2 gallons per cycle
- 1 3/4” vandal-proof, metering push handle for effortless glass filling
- MVP actuator assembly and metering cartridge control flow of water
- Single hole for wall mounting
- Quantity
- 1/Each
- Shipping Weight
- 1.74 lb.
- Spout Length
- 4 Inches
- Faucet Width
- 2 1/4 Inches
- Faucet Height
- 3 Inches
- Faucet Centers
- Single
- Finish
- Chrome
- Flow Rate
- 0.2 GPM
- Installation Type
- Wall Mounted
- Material
- Brass
- Mounting Style
- Wall Mounted
- Number of Faucets
- 1 Faucet
- Pressure Rating
- 20 - 125 PSI
- Style
- Push Down
- Temperature Rating
- 40 - 140 Degrees F
- Type
- Glass Fillers
- Water Inlet Size
- 1/2 Inches
Chicago Faucet Company 324-665PSHABCP Details
Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets wall-mounted glass filler. This glass filler releases a steady flow of water at 0.2 gallons per cycle. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety.
The 1 3/4" vandal-proof, metering push handle makes it easy to fill your glasses. Control the flow of water with the help of the MVP actuator assembly and metering cartridge. This model has a single hole for wall mounting. Compatible spouts are available for purchase.
Overall Dimensions:
Spout Length: 4"
Faucet Height: 3"
Faucet Width: 2 1/4"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
U.S. Green Building Council (USGBC)
This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
ICC-ES Drinking Water NSF/ANSI 61, Section 9
This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.
ICC-ES Low Lead NSF/ANSI 372
This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
Buy American Act Compliant
This product complies with the provisions of the Buy American Act.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
Chicago Faucet Company 324-665PSHABCP
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources