$346.49/Each
Ships free with PlusEarn up to $10.39 back (1,039 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Durable, cast brass construction and polished chrome finish
- Pressure compensating Softflo aerator that releases a soft, non-splashing flow of water at 2.2 GPM
- 4” fixed centers that allow it to match the centers on your sink or mounting surface with ease
- Stylish 8” rigid / swing gooseneck spout
- Vandal-proof 2” canopy single-wing handles are color coded for easy identification
- Quantity
- 1/Each
- Shipping Weight
- 5.13 lb.
- Handle Length
- 2 Inches
- Spout Length
- 8 Inches
- Faucet Width
- 8 Inches
- Faucet Height
- 12 1/2 Inches
- Cartridge Type
- Compression
- Faucet Centers
- 4 Inches
- Features
- ADA Compliant
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- Canopy
- Installation Type
- Deck Mounted
- Material
- Brass
- Mounting Style
- Deck Mounted
- Mounting Type
- Workboard
- Pressure Rating
- 20 - 125 PSI
- Rough In
- 4 Inches
- Spout Clearance
- 7 Inches
- Spout Type
- Gooseneck
- Sprayer
- Without Sprayer
- Temperature Rating
- 40 - 140 Degrees F
- Water Inlet Size
- 1/2 Inches
Chicago Faucet Company 1895-GN8AE3ABCP Details
Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets 2.2 GPM deck-mounted manual sink faucet with 4" fixed centers and 8" rigid / swing gooseneck spout. Designed with a sleek, 8" rigid / swing gooseneck spout, this faucet combines functionality with style. This unit is equipped with a pressure compensating, Softflo aerator that releases a soft, non-splashing flow of water at 2.2 GPM. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety.
It boasts 4" fixed centers that allow it to match the centers on your sink or mounting surface with ease. The hot and cold, vandal-proof 2" canopy single-wing handles are color coded for easy identification. Control water flow and prevent leaks with the help of the Quaturn compression operating cartridges. The deck-mounted design is easy to install, and it uses 1/2" NPSM supply inlets and a coupling nut suitable for 3/8" or 1/2" risers.
Overall Dimensions:
Spout Length: 8"
Faucet Height: 12 1/2"
Faucet Width: 8"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
Buy American Act Compliant
This product complies with the provisions of the Buy American Act.
U.S. Green Building Council (USGBC)
This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.
ICC-ES Drinking Water NSF/ANSI 61, Section 9
This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
Chicago Faucet Company 1895-GN8AE3ABCP
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources