Choice 1/2" Blade Assembly and Push Block for French Fry Cutters
Other Available Sizes:
- Cuts 1/2" thick French fries
- Great for restaurants, food trucks, snack stands, and more
- Compatible with all Choice French fry cutters
- Sturdy and sharp stainless steel blade
- Durable cast aluminum push block and blade assembly frame
First, remove the pusher block, blade frame and shield. Wash, rinse, sanitize, and then dry these parts. Before reassembling, wipe down the frame with a detergent solution, followed by a sanitizer solution.
How to assemble:
Tighten the nuts and bolts to attach the cutter handle and use a screwdriver to fasten the pusher block. Insert the shield, and then secure the blade frame by tightening the wing nuts.
How to use:
Place a potato on the shield between the pusher block and the blade frame. Swiftly pull the handle toward the blade frame to slice the potato.
Watch this video to learn how to use, clean and maintain your French fry cutter! These step by step visual instructions will be sure to help you keep your French fry cutter with a 1/2 inch blade running like new.
Customer questions about this product
- Are the blades interchangeable?
- Yes, if you replace the blade and pusher block together, you can easily switch a Choice, Thunder Group, or Winco brand French fry blade from one cutter to another. The blade frames are the same size and the mounting screws at positioned at the same locations. However, the replacement blades and pusher blocks are not compatible with Nemco fry cutters.
- Can I use this French fry / potato cutter when working with sweet potatoes?
- No, it is recommended to not use sweet potatoes with this French fry / potato cutter since sweet potatoes are too hard and too dense to properly pass through the cutter blades. Forcing sweet potatoes through could ultimately end up breaking the blades.
Quickly and easily create fresh-cut fries with the assistance of this Choice 1/2" French fry cutter blade assembly and push block. Producing 1/2" thick slices, this blade and push block are great for traditional, skinny fries at your restaurant, food truck, snack stand, and more! This blade and pusher are compatible with all Choice French fry cutters (sold separately), so you can easily exchange blade sizes and cuts on your existing machine.
Made of stainless steel, this blade remains sturdy and sharp as it effortlessly slices your potato. Plus, it won't rust, maintaining its sparkling appearance and sanitary design for years to come. Thanks to this push block and blade assembly's frame cast aluminum construction, the block forces your potato through the blade, while the frame secures the blade.
Hand wash only.
Paper French Fry Cups
Stainless Steel French Fry Scoop with Double Handle
Avantco Free Standing 2 Bulb Heat Lamp / Food Warmer
Ketchup and Ketchup Packets
8 oz. Acrylic Dredge / Measuring Cup
Stainless Steel Steam Table Pan False Bottoms
Countertop Food Warmers
Standard Duty Potato / Fry Cutters
Overall User Rating: Choice 1/2" Blade Assembly and Push Block for French Fry Cutters ( 5.0 stars from 5 reviews )
BACKGROUND: I'm just a guy who likes fun gadgets to cook with in his kitchen. I use this now and then, but if you're wondering how this thing would hold up being used 100 times a day, 7 days a week, in a business setting ... I have no idea. INTRO: This is the 1/2" blade and push block only. You aren't getting the base device unless you specifically buy it (which you need for this purchase to be of much use). There are other size french fry blades/pushers and various sized wedge cutter blades/pushers. They run about $10-20 each. SIZE: These are some big french fries. If you think about a McDonald's fry, it's probably the 1/4" size. This 1/2" size is therefore like 4 times the thickness of a McDonald's fry. Still, if you like a good combination of outside crunch and inside potato-y goodness, I would recommend this size. STABILITY: The blades are sharp. The materials are all high quality and metal. It's easy to set up and use. The blades are easy to switch out. THE GOOD: Look, it's a add-on product for the base device. It works great. It can handle a pretty good size potato or sweet potato. The fries come out nice. There's not much I can say here. THE BAD: Not much to say here either, because it works good. The more regular of a potato you use (oval, plump), the better results you'll get with your fries. SUGGESTION: The best thing to do for any potato is to cut the end tip off of the potato so it's flat. It'll help keep the potato in place for when you push down on it. CLEANING. Everything comes apart for easy of cleaning. I'd suggest you, at minimum, wipe it down after every use with a good cleaning every so often. RECOMMENDATION: Worth the purchase if you have some extra money and are a big french fry eater. Make sure you have the base device so that you can actually use it. You can buy it with the base device or without.
John N. Posted on 01/08/2015
Makes great fries! It fits great in the cutter, so I interchange them when needed. It\'s of great build quality, and I would definitely recommend.
Isaac J. Posted on 01/13/2014
Haven't used it yet but I'm sure it works like the 3/8 blade, only difference is makes 1/2 inch fries. they want you to write at least 29 words or I would of just wrote works just fine.
Steve M. from D&S Photography Posted on 09/17/2011
Makes the perfect size fries, not to small or too large. I use this more than any other tool or appliance in my business. The blades never seem to dull.
Judy S. from skinny's Posted on 10/12/2010
I bought these to use with the 3/8" French Fry cutter I bought here. It is the same great quality as the cutter that came with mine.
Keith G. Posted on 10/08/2010
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register