Hobart 4732-35-STD # 32 Meat Chopper with Feed Pan - 3 hp
Contact us for pricing
Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)
- Fresh meat capacity of 35 to 40 lb. per minute
- Compact design, epoxy enamel finish
- Includes 14 gauge stainless steel pan
White Glove Delivery - Available -What is White Glove service?
Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!
The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.
Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.
"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
The Hobart model 4732 chopper is designed to grind 35-40 pounds of fresh or tempered frozen, up 24 degrees Fahrenheit meat per minute through a 1/8" plate. It uses a 3 horsepower Hobart-built motor and is available for single or three phase service. A tin feed pan is standard equipment. Cut the meat into chunks about the size of a fist. And place in the feed pan. The fineness of cut depends on the size holes in the chopper plate. The knife and plate must be kept clean and sharp for a fine cut. The tightness of the adjusting ring does not regulate fineness of cut. Therefore, only moderate tightness is recommended. The adjusting ring should be hand tight.
The meat deflector should be placed over the adjusting ring. Start the machine by pulling the start/stop switch knob. Feed meat under the guard and into the feed pan opening. Warning: Never place hands in the feed pan opening. Use the feed stomper. The feed stomper should be used to dislodge over sized pieces and to dislodge meat which may become stuck in the feed pan opening, or cylinder opening. It is not necessary to force meat through the chopper. When the product is run through the chopper for a second time, more speed is attained by feeding small quantities at a time. Allow the machine to feed at its own pace.
The chopper should be thoroughly cleaned at the end of each day, or any time the machine is not to be used for an extended period of time. To disassemble for cleaning, disconnect the electrical power supply. Fold the meat deflector straight up to remove. Using the spanner wrench, loosen the adjusting ring, then unscrew and remove the adjusting ring with both hands. Place it in the sink for cleaning. Hook the spanner wrench around the plate stud, and pull the worm end out of the cylinder. Then remove the plate, the knife, and then the worm.
Take the parts to a sink for cleaning. Using the spanner wrench, loosen but do not remove the cylinder nuts. With one hand on the bottom of the cylinder for support, it's heavy, turn the cylinder clockwise and remove to the sink. The feed pan is permanently attached to the machine, and is designed to be cleaned in place. To clean the feed pan, place a bucket under the feed chute of the pan, and thoroughly clean using hot soapy water. After rinsing, the pan should be sanitized.
Thoroughly clean all removed parts in the sink, using hot soapy water, and sanitizer. Wipe the machine housing with a damp cloth. Prior to reassembly, a light coating of tasteless mineral oil should be applied to the inside of the cylinder, the threads on the cylinder and adjusting ring, worm edges, knife and plate, and any other exposed non-plated metal surfaces.
To reassemble the machine, first install the cylinder. With the cylinder in position, rotate it counterclockwise until the ears are under the cylinder nuts. Tighten the cylinder nuts finger tight. Slide the worm on the cylinder and rotate it to engage the square shag with the attachment drive. With the spanner wrench, tighten the cylinder nuts. Caution: Do not over tighten the cylinder nuts. Install the knife, cutting edges out. And the plate. Screw the adjusting ring on hand tight. Store the feed stomper here.
This concluded operator training for the Hobart model 4732 chopper. To obtain service and parts information concerning this chopper, contact your local Hobart service office.
Learn how to properly assemble, clean, and operate your Hobart model 4732 chopper with this informative, step-by-step video.
|Width||23 1/2 Inches|
|Depth||46 3/16 Inches|
|Capacity||35 - 40 lb. per minute|
|Type||Meat Choppers / Grinders|
Customer questions about this product
- What do I need to do to complete my order for this meat grinder / chopper?
- Under “Accessories & Options” (top right of the page), any fields marked with an asterisk (*) MUST be selected at time of order; you need to choose one of the available options in that field for the product to work properly. However, you can find all of our available options on the site too. If, for example, you wanted to order several different grinder plate sizes, you can find additional ones in our Meat Grinder Accessories category!
For rapid, on-demand meat chopping for processing fresh, boned meat, choose the Hobart 4732-35-STD # 32 meat chopper! This compact-design chopper can be fed at a rapid pace with continuous chopping action. Plus, it won't mash or crush meat, allowing food product to keep its natural color and flavor! This chopper has a fresh meat capacity of 35 to 40 lb. per minute through a 1/8" plate, and 25 to 30 lb. of second cutting beef per minute through a 1/8" plate (plates sold separately).
- Includes 14 gauge stainless steel feed pan with guard
- Designed for use with standard # 32 knives and plates (sold separately)
- Powered by a 3 hp motor
- Oil bath transmission with double lip seal to prevent loss of oil and moisture damage
- All food contact surfaces are easily cleanable
- Also features a magnetic-type contractor, # 32 tinned chopping end and feed stomper, and waterproof junction box
- Requires a 230V single phase electrical connection; connection is a 3/4" female conduit thread
Width: 23 1/2"
Depth: 46 3/16"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date,
please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
Made in America
This item was made in the United States of America.
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
Other Products from this Line
Hobart 6614-1 126" Vertical Meat Saw - 3 hp, 200-230/60/3V
Weston 10-3201-W #32 Pro Series Electric Meat Grinder - 120V - 2 hp
Weston 10-1201-W #12 Pro Series Electric Meat Grinder - 120V - 1 hp
Galaxy SMG400 #5 Meat Grinder - 120V
Hobart 4246-1 # 32 Meat Grinder / Mixer - 5 hp
Hobart 4146-20 # 32 Meat Grinder - 5 hp
Hobart 4812-36 #12 Meat Grinder / Chopper 120V - 1/2 hp
Weston 82-0102-W #5 Deluxe Electric Meat Grinder with Tomato Strainer Attachment
Globe CM12 Chefmate #12 250 lb. Meat Grinder
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register