$37.49/Each

Other Available Sizes:

Item:
40747713
Units:
Each
Shipping:
Usually Ships 1 Business Day
When will I receive my Item?
Reviews:
29 reviews
UPC Code:
789313522033

Companion Items

How to Use a French Fry Cutter With a 3/8 inch Blade

How to Use a French Fry Cutter With a 3/8 inch Blade

How to clean:
First, remove the pusher block, blade frame and shield. Wash, rinse, sanitize, and then dry these parts. Before reassembling, wipe down the frame with a detergent solution, followed by a sanitizer solution.

How to assemble:
Tighten the nuts and bolts to attach the cutter handle and use a screwdriver to fasten the pusher block. Insert the shield, and then secure the blade frame by tightening the wing nuts.

How to use:
Place a potato on the shield between the pusher block and the blade frame. Swiftly pull the handle toward the blade frame to slice the potato into fries.

Copy and paste the embed code above.

Watch this video to learn how to use, clean and maintain your French fry cutter! These step by step visual instructions will be sure to help you keep your French fry cutter with a 3/8 inch blade running like new.

Specs
Installation Type Countertop
Material Cast Iron
Power Type Manual
Slice Thickness 3/8 Inches
Type Straight

Customer questions about this product

Are the blades interchangeable?
If you replace the frame and pusher block together, you can convert an Update, Thunder, or Winco brand French fry cutter from one cutting size to another. However, the replacement frame and pusher blocks are not compatible with Nemco fry cutters.
What are the measurements between the mounting holes?
Width: 6 3/4” apart
Length: 10” apart
Ask your own question!

Details

With its durable cast iron body and handle, this French fry cutter easily cuts whole potatoes into 3/8" wide strips. The 3/8" French fry cutter's blade assembly frame and pusher block are rust proof and remove easily after use for easy clean up. Assembly required.

This fry cutter is best for lighter duty use. Not recommended for cutting sweet potatoes. For commercial use, the comparable Nemco model is best.

Also known as: FFC 38, FFC.38, or FFC38

Downloads

Instructions Instructions

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Related Items

Customer Reviews

Overall User Rating: 3/8" French Fry Cutter / Potato Cutter ( 4.6 stars from 29 reviews )

    This is a great cutter for the price. We use this daily and it's held up very well. Works best mounted to the wall. Would definitely purchase again.

    Posted on

    Hi evryone, this item is amazing, is stroger and has a very, very good price. i buy this articules for a small pizzeria and work good

    from EAT Posted on

    with the ever increasing cost of products we are always looking for a cheaper but better way to produce great products. and this French fry cutter was a step in that direction. makes a great product every time.

    from Randys family restaurant Posted on

    WOW. This is awesome. Large capacity so you can cut really long French fries. I have not attached it to counter but would work a lot easier if more secure.

    from rancher feed and seed Posted on

    I bought this for home use but it could easily be used in a restaurant atmosphere. Very sturdy construction and the leverage you get from the long handle makes quick work of slicing through those potatoes. Excellent value and best prices around.

    Posted on

    I am very happy with this cutter. It is a bit heavy but feels very solid in use. It cuts like a breeze and gives great, consistent fries. I did learn the hard way not to use potatoes if they get even a little soft. They get stuck in the blades. Use a nice fresh potato and you wont be disappointed.

    from Aspire Posted on

    This is by far the best cutter around. It is all steal construction and really cuts great. It powers though even the largest taters with ease. It comes apart easy to clean. The suction cup feet are very powerful on a stainless table. Could not live without it.

    from Gilpin Market Posted on

    This french fry cutter works just as it should though, it is a bit heavy, and cleaning requires disassembling and unscrewing both the cutter and pushblock. 3/8" cutter made about 2 dozen nice size fries from an one average potato.

    Posted on

    Made about 2 dozen fries for 3/8" cutter from 1 potato.

    I purchased the French Fry cutter, for out Christmas bazaar, and like the other reviews, we did attach it to the wall. Much better. Makes awesome French fries, so easy and quick. Great buy and inexpensive. Would purchase again.

    from St. Mary's Piscataway Posted on

    Had to buy this one for a friend who kept borrowing mine. This really gets a workout. Also purchased the 1/4in cutter head that attaches easily. Real solid unit!

    Posted on

    Bought this last year for "home use". Now I can easily make "shoestring" fries, just sorry I didn't buy one sooner! Good "heavy" construction, easy to use and clean, love it!

    Posted on

    This french fry slicer is quite nice for the price. I had the pleasure of using one during my culinary schooling, and it is a nice piece of equipment. It is sturdy, durable, and easy to clean.

    Posted on

    This french fry cutter for an old time burger joint. Just one press and you have fresh fries ready to drop. Its very durable and easy to clean.

    Posted on

    This cutter is my business! Without this fry cutter I could not produce the product that all of my customers expect; hot, crisp and constant hot french fries.

    from CUP-O-FRIEZS Posted on

    Spend the money on a really good french fry cutter if you're not just making the occasional batch of french fries with dinner. The handle is so much heavier than the cheaply-built unit that it's borderline scary to use. The tines bent beyond recognition within a week of light use.

    from Gut Bustas Catering, LLC Posted on

    This is a really great french fry cutter. Especially for the price. barely 42 bucks you can't go wrong! less than half the price of most of the fry cutters out there

    Posted on

    Great product, every place should cut their french fries in house. This give the perfect size cut for any potato. Blade will begin to dull over time and fixture should be screwed into something heavy to make punch process easier

    Posted on

    Excellant convience for great fries. When I purchased I forgot to get the "wall mount" and it was difficult clamping to the counter top hehehe. Recommend getting the wall mount added. Makes all the difference in the world. I purched the 1/4" plates 2 weeks later, and the worked perfect with swap out. So now have convience of 3/8" or 1?4" fries, Recommend this for anyone planning on doing french fries the convient way

    from Home Cooking Posted on

    makes nice French fries. takes a lot of strength to pull the handle. needs a way to ad more leverage. maybe little longer handle or something, I'm not sure how to do it.

    from D&S Photography Posted on

    It does an awesome job of cutting fries with the 3/8" cutter. I just ordered a 1/4" cutter and pusher. You must order a new pusher with a new cutter unless you already have a pusher for the new cutter of that particular size. It is awesome to have in my home kitchen. I can kick out 5 pounds of fries in just minutes. Enough to feed the hungry family.

    Posted on

    This is a very, very good quality product to have on hand when making home fries. However it works best when mounted on a block of wood to keep it still when in use. Many size cutters to fit too.

    from Club Baxter (My House) Posted on

    3/8" cutter size

    Made in China so it only gets 4 stars. Base mounting legs are uneven but shouldn't be a big problem if bolted down tightly to whatever you mount it on. Assembly is required and there are no instructions included but they are posted online so you can print it out. Also, you'll need a set of metric wrenches or at least three that include 10mm, 14mm and 17mm. Fortunately I had a set on my workbench. I suppose you could get by with a pair of pliers and a small adjustable wrench but the working space on some of the nuts is fairly close. It does cut well but it's the first time I've used one so I don't have anything to compare it with. It is probably a very good deal for the price.

    Posted on

    This product is well made ,works excellent.I saw another one not as nice at restuarant depot for three times as much money .Shipping was fast ,Im very impressed.

    from cluckinwings Posted on

    I was worried about quality at a price as low as what I purchased this for. I haven't had any issues, and was actually pleased with the strong frame

    from Zippy's Posted on

    Heavy Duty and Quality describe this french fry cutter and a great price. You will easily cut pounds of potatoes in minutes. I mounted mine to a board for portability.

    Posted on

    This is a great little product and a best buy for cutting potaotes. Very well built, easy to set up and a breeze to use.

    from Hahnemann Health Posted on

    This Fry Cutter is the best. Heavy duty and durable, making vegetable cutting a breeze. This is being used to cut potatoes, cucumbers, zucchini, and all sorts of vegetables. We have mounted it on a wall, so gravity helps with a clean sweep down, you whole vegetable is cut perfectly. Easy install and easy clean up. Webstaurant shipped fast and in perfect condition.

    Posted on

    I recently started a french fry stand and this product is great. This cutter produces fresh cut fries quickly and efficiently. I would highly recommend this to anyone that wishes for pefectly cut fries. Very durable, very solid product.

    from FRY TYME Posted on

    This french fry cutter makes cutting fresh frys fast,easy and very little mess to clean up. my old cutter took alot of pressure to cut this one take half as much.

    from Fischer Catfish Posted on

Have you used this product?

Log in to write your own review and earn up to $16.00 with video, photo, and text reviews!

Login or Register