• Quantity Discounts!

$112.76/Each

Buy 1 - 2 $123.99/Each

  • Non-marking polyurethane casters
Item:
109APR1826L
Units:
Each
Shipping:
Usually Ships 1 Business Day
When will I receive my Item?
Reviews:
8 reviews
UPC Code:
835384003541

Companion Items

Assembly of a Regency Bun Pan Rack is Quick and Easy

Assembly of a Regency Bun Pan Rack is Quick and Easy

If you’re looking for a durable end load or side load bun pan rack at an outstanding price, our Regency rack is the perfect solution for you. Because this model ships knocked down, you’ll save money on shipping charges compared to a pre-assembled model. But don’t worry, this end load pan rack is easy to assemble, and it takes less than 15 minutes to put together! If you are assembling a side load pan rack, you can follow the same directions too! When assembled, this Regency pan rack has the durability and strength of a welded unit and can hold up to 20 full size pans or 40 half size pans with 3” of spacing between the slides. Thanks to its heavy duty 5” polyurethane swivel casters, moving the rack around your kitchen or business is easy, even over rough surfaces. Since two of the casters have brakes, you’ll be able to keep the rack right where you want it, and keep it steady during loading and unloading. Polyurethane casters like these also roll quietly, and won’t leave marks on your floors. When assembling this sheet pan rack, it is important to make sure you are working on a flat, level surface. This rack comes with 4 cross braces which are held securely in place with U brackets and bolts. The 2 larger side braces for the bottom of the rack are held in simply with the larger and heavier-duty bolts. To start, insert a support post into the top hole of one of the sides. Next, take a U bracket and attach it to the outside of the rack’s frame. Carefully hand-tighten the bolt, and then repeat the process for the other side. Be sure to not over-tighten or you could damage the frame and cross braces. After attaching the top two supports, you can attach the two middle supports. Just a reminder, you have to attach the U brackets to the outside of the rack. After installing the fourth support bar, it’s time to do the second side. Now these support bars will all fit into the slots the same way as the first side. Make sure to only hand tighten the brackets. Now that all four support braces have been hand tightened, the next step is installing the casters. Insert each caster into the frame at the bottom making sure the holes are correctly aligned with the holes in the frame. The locking casters should be installed on the same end of the rack, so they can be set easily. Once the casters are properly aligned, the large support post can be installed. The large bolts go through the hole, securing the caster and post to the bottom of the rack. Keep in mind, no U bracket is needed for this part. You want to put a bun pan in both the top and bottom slots of the rack. This is to make sure your bun pan is level, so you won't have to worry about your pans sliding out of your rack. The final step is to tighten each bolt with a wrench. After you have tightened all the bolts, your rack is ready to use. Thank you for watching. If you have any questions, be sure to contact our live chat.

Copy and paste the embed code above.

Regency bun pan racks are as durable as welded models and, because they ship unassembled, they save you money on shipping! In this video we'll show you how easy it is to assemble one of these racks, which can hold up to 20 full size food pans.

How To Assemble A Regency Bun Pan Rack

How To Assemble A Regency Bun Pan Rack

If you’re looking for a durable end load or side load bun pan rack at an outstanding price, our Regency rack is the perfect solution for you. Because this model ships knocked-down, you’ll save money on shipping charges compared to a pre-assembled model, but don’t worry. These pan racks are easy to assemble. When assembled this Regency pan rack has the durability and strength of a welded unit and can hold up to 20 full size pans or 40 half size pans with 3 inches of spacing between the slides. And thanks to its heavy-duty, 5”, polyurethane, swivel casters, moving the rack around your kitchen or business is easy. Since two of the casters have brakes, you’ll be able to keep the rack where you want it, and to hold it steady during loading and unloading. This rack comes with four cross braces which are held securely in place with U brackets and bolts. The two larger side braces for the bottom of the rack are held in with larger bolts. To start, insert a support post into the top hole of one of the sides. Next, take a U bracket and attach it to the outside of the rack’s frame. Carefully hand-tighten the bolt and then repeat the process for the other side. Be sure not to over-tighten the bolts, or else you may damage the frame and cross braces. Then, attach the two middle supports, making sure the U brackets are on the outside of the rack. After installing the floor support bar, it’s time to do the second side. These support bars will fit into the slots the same way they did on the first side. Make sure to only hand-tighten the brackets. Insert each caster into the bottom of the frame. The locking casters should be installed in the same end of the rack so they can easily be set. Once the casters are properly aligned, large support posts can be installed. The large bolts go through the hole, securing the caster and post to the bottom of the rack. Put a bun pan in both the top and bottom sides of the rack to make sure your bun pan is level. Finally, tighten each bolt with a wrench. Your bun pan wrack is now ready to use.

Copy and paste the embed code above.

Check out this video and watch as Chef Matt takes you step by step to assemble your Regency bun pan rack! It’s quick, easy, and saves you a ton on shipping costs!

Specs
Length 28 1/4 Inches
Width 18 Inches
Height 69 1/4 Inches
Assembled No
Casters Yes
Loading Style Side Load
Material Aluminum
Rack Type Bun Pan
Sheet Pan Capacity 20 Pans
Style Open
Type Full Height

Details

This unassembled side load bun pan rack has a curved top design and durable sides made of aluminum, with six cross supports. It can hold 20 full size pans with 3" spacing. This side load pan rack's 5" polyurethane non-marking casters enable a quiet, smooth ride. The overall dimensions are 28 1/4"L x 18"W x 69 1/4"H.

This premium bun pan rack offers the strength and durability of a welded unit at an outstanding price.

Downloads

Spec Sheet Specsheet

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Related Items

Frequently Purchased Together

Customer Reviews

Overall User Rating: Regency 18" x 28 1/4" x 69 1/4" Side Load Bun Pan Rack - Unassembled ( 4.3 stars from 8 reviews )

    These bun racks are great for baking products. Unlike the front load racks you can load the trays where there is less lip space to catch saran wrap.

    from Young Life Crooked Creek Ranch Posted on

    This product has been okay for the price. However it is a little unsteady and needs to be reinforced with extra screws if you want to keep it from leaning.

    Posted on

    The unassembled bun rack is a great way to save on these items. They assemble in minutes and are an vital to an efficient kitchen.

    from Ckd Restaurants, llc. kitchen Posted on

    We use dozens of these racks. Some of them are a little inconsistent in their widths, but it doesn't take much to modify them. They're sturdy...and we put them through a lot!!

    Posted on

    Great product! Very easy to assemble. I use it to hold my cake orders after they are finished. Bought the full sheet pans to go with it!

    from Sweet Things Posted on

    It's very easy to assemble. Very practical to have one in the kitchen. I could store 20 tray at once keep in the freezer and get it out.

    from St. Mary Armenian Church Posted on

    Definitely priced well, and EASY to assemble! Easy to wipe down, and easy to move around the kitchen with the properly sized wheels. Don't know what I'd do without it.

    Posted on

    Modestly priced. Works well.

    Posted on

Have you used this product?

Log in to write your own review and earn up to $16.00 with video, photo, and text reviews!

Login or Register

Find Related Products

bun pan rack     half size bun pan rack     sheet pan rack cover     end load bun pack rack