• Quantity Discounts!

$269.78/Each

Buy 1 - 2 $299.99/Each

  • Holds 20 full size or 40 half size sheet pans
  • Durable stainless steel construction
  • Shelves spaced at 3" increments
  • Easy to clean
  • 400 lb. weight capacity
  • Includes (4) 5" non-marking casters, two with locks
  • Perfect for storing and transporting baked goods

UPC Code:

600PR20316K

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

The Regency 20 pan end load stainless steel sheet pan rack will help keep your busy kitchen organized.

Capable of holding 20 full size or 40 half size pans, this Regency end load stainless steel bun pan rack is perfect for transporting your food around your bakery, restaurant, or cafeteria. Because the rack is tall and thin, it utilizes vertical space without taking up much valuable floor space in your kitchen. This bun pan rack is also built with durability in mind, so you can be sure it will stand up to use in your establishment.

Durable Stainless Steel Construction

To ensure this product can withstand use in your busy commercial kitchen, it is made with a durable stainless steel material.

Provides Ample Storage Space

The rails on this rack are spaced 3" apart, giving your foods plenty of room so air can properly circulate. It also has a 400 lb. weight capacity, so you can safely hold all of your cooked or prepared foods.

Ships Unassembled

For economic savings on shipping costs, this product ships unassembled.

Mobile Design

This sheet pan rack comes with 2 locking and 2 non-locking 5" polyurethane casters.

Easy to Clean

This product is very easy to clean, ensuring no food or spilled liquids get stuck in hard-to-reach corners.

Watch More Videos

Regency Stainless Steel Bun Pan Rack

Save on shipping but still get your bun pan rack ready to use in just minutes! Watch our short video to see just how quick and easy it can be to assemble the Regency stainless steel bun pan rack so that you can avoid assembly headaches.

How to assemble a Regency stainless steel bun pan rack. If you’re looking for a durable end load bun pan rack at an outstanding price, our Regency stainless steel rack is the perfect solution for you. Because this model ships knocked down, you’ll save money on shipping charges compared to a preassembled model. But don’t worry, these pan racks are easy to assemble! When assembled, this stainless steel pan rack has the durability and strength of a welded unit and can hold up to 20 full size pans or 40 half size pans with three inches of spacing between the slides. The Regency stainless steel bun pan rack has 16 gauge type 430 stainless steel slides and 20 gauge 1" OD square tubing for long lasting performance. And thanks to its heavy duty 5" polyurethane swivel casters, moving the rack around your kitchen or business is easy. Since two of the casters have brakes, you’ll be able to keep the rack where you want it, and to hold it steady during loading and unloading. Polyurethane casters like these also roll quietly and won’t leave marks on your floors. This rack comes with four cross braces which are held securely in place with bolts. To start, attach the support pole to the top hole of one of the sides. Carefully hand tighten the bolt and then repeat the process on the other side. Then attach the two middle supports. After installing the fourth support bar, it’s time to do the second side. Insert each caster into the bottom of the frame. The locking casters should be installed on the same end of the rack so they can be set easily. Once the casters are properly aligned, the bottom support posts can be installed. The bolts go through the hole, securing the caster and the post to the bottom of the rack. Put a bun pan in both the top and bottom slots on the rack to ensure that your rack is level. Finally, tighten each bolt with a wrench. Your bun pan rack is now ready to use.

Copy and paste the embed code above.

How To Assemble A Regency Bun Pan Rack

Check out this video and watch as Chef Matt takes you step by step to assemble your Regency bun pan rack! It’s quick, easy, and saves you a ton on shipping costs!

If you’re looking for a durable end load or side load bun pan rack at an outstanding price, our Regency rack is the perfect solution for you. Because this model ships knocked-down, you’ll save money on shipping charges compared to a pre-assembled model, but don’t worry. These pan racks are easy to assemble. When assembled this Regency pan rack has the durability and strength of a welded unit and can hold up to 20 full size pans or 40 half size pans with 3 inches of spacing between the slides. And thanks to its heavy-duty, 5”, polyurethane, swivel casters, moving the rack around your kitchen or business is easy. Since two of the casters have brakes, you’ll be able to keep the rack where you want it, and to hold it steady during loading and unloading. This rack comes with four cross braces which are held securely in place with U brackets and bolts. The two larger side braces for the bottom of the rack are held in with larger bolts. To start, insert a support post into the top hole of one of the sides. Next, take a U bracket and attach it to the outside of the rack’s frame. Carefully hand-tighten the bolt and then repeat the process for the other side. Be sure not to over-tighten the bolts, or else you may damage the frame and cross braces. Then, attach the two middle supports, making sure the U brackets are on the outside of the rack. After installing the floor support bar, it’s time to do the second side. These support bars will fit into the slots the same way they did on the first side. Make sure to only hand-tighten the brackets. Insert each caster into the bottom of the frame. The locking casters should be installed in the same end of the rack so they can easily be set. Once the casters are properly aligned, large support posts can be installed. The large bolts go through the hole, securing the caster and post to the bottom of the rack. Put a bun pan in both the top and bottom sides of the rack to make sure your bun pan is level. Finally, tighten each bolt with a wrench. Your bun pan wrack is now ready to use.

Copy and paste the embed code above.

Compare to Other Products

Price

$299.99/Each

$89.99/Each

$109.99/Each

$119.99/Each

$129.99/Each

$174.99/Each

$179.99/Each

$189.99/Each

$189.99/Each

$199.99/Each

Length 26 Inches 26 Inches 26 Inches 26 Inches 26 Inches 26 Inches 26 Inches 26 Inches 26 Inches 26 Inches
Width 20 1/4 Inches 20 Inches 20 1/4 Inches 20 1/4 Inches 20 Inches 20 Inches 20 1/4 Inches 20 Inches 20 1/4 Inches 20 Inches
Height 70 1/2 Inches 69 Inches 69 1/2 Inches 69 Inches 63 Inches 69 Inches 69 1/2 Inches 63 Inches 69 Inches 69 Inches
Assembled No No No No No No Yes Yes Yes Yes
Shelf / Ledge Spacing 3 Inches 3 Inches 3 Inches 5 Inches 3 Inches 3 Inches 3 Inches 3 Inches 5 Inches 3 Inches
Overall Dimensions:
  • Length: 26 Inches
  • Width: 20 1/4 Inches
  • Height: 70 1/2 Inches
Specsheet Specsheet Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Regency Tables and Sinks assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications.

Other Products from this Line

Related Items

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register