• Free Shipping!  

$11,892.60/Each

Contact us for pricing

Why do we do this?

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

  • 70 degree rise, 8.5 kw booster heater
  • Cleans up to 65 racks per hour
  • Uses only 3/4 gallons of water per rack
  • 208-240V, 60Hz., single phase
  • Water and energy saving rinse system
  • Four cycles from 1 - 6 minutes long

UPC Code:

400010092192

Condition:

New
Shipping:

Usually Ships in 3-4 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

Hobart AM15 Select Dishwashers

Hobart AM15 Select Dishwashers

The following operator training video on the Hobart AM select dishwasher is a supplement to the instruction manual that came with your AM select dishwasher. If you have any questions concerning operation, please consult your manual. The AM select series of dishwashers, the AM15, AM15F, and AM15T are designed to operate in one of two modes. Hot water sanitizing mode designated by letters AH or AP on the display when the machine is turned on, or a chemical sanitizing mode designated by the letters AC on the display when the machine is turned on. The serial number can be found on the machine data plate, located on the bottom of the front panel. Once the unit is turned on, the AM will fill the wash tank to the appropriate level and automatically stop filling once the level is reached. A float located in the wash tank will shut off the heat supply if the water level becomes too low, when the water returns to a proper level, the heating circuit is again operational. A frame-mounted electric booster water heater is available as an option on machines equipped with electric tank heat. The booster water heater is designed to maintain a minimum final rinse temperature of 180 degrees Fahrenheit, provided the incoming water to the booster heater is at least 110 degrees Fahrenheit. The overflow tube must be in its proper location below the strainer pan. Place the strainer pan and the strainer bucket in their proper position. An automatic detergent dispenser is recommended. Closely follow suppliers instructions. Close the door. This will automatically close the drain. Open the manual gas valve if applicable. Press the on button to turn the power on. If the machine's door is closed, and no water is in the tank, the fill cycle will begin automatically. During the fill cycle, the word fill is displayed. When the fill cycle is completed, the re-valve will display the wash temperature. During the rinse cycle, the rinse icon and temperature will be displayed. Select the wash cycle. One for normal servingware, two, four, or six for pots and pans. Each wash cycle is followed by an automatic rinse. When the rinse cycle is complete, the door can be opened. Scrape the dishes to remove large particles of food and debris. Never use steel wool on ware to be loaded into the dish machine. Arrange the dishes in the rack. Do not stack dishes on top of one another. Water must have free access to all sides of every dish. Stand plate and dishes up edge wise in a peg-type rack. Cups, glasses, and bowls should be inverted in an open type or compartment type rack. Silverware and other small pieces may be scattered loosely over the bottom of a flat bottom rack. Do not allow foreign objects to enter the unit, especially metallic contaminants. After filling the rack, open the door, slide the rack into the dishwasher, and close the door. Cycle starts when the door is closed. Throughout the wash cycle, the tank water temperature will be displayed on the front panel display along with the word "wash" and an icon. During the rinse cycle, the rinse water temperature will be displayed along with the word "rinse" and an icon. When the rinse cycle is completed, the re-valve will display the tank water temperature. When the cycle is finished and the rinse icon disappears, open the door, remove the clean dishes, slide in another rack, and close the door. To add a dish after the wash cycle has started, open the door slightly, wait 10 seconds to allow the wash arm to coast down, and avoid water from splashing before opening the door fully. Operating temperature for all models can be found on the operating label on the front of the machine. Model AM15F has a front loader door and loading tray. The machine can operate with the loading tray positioned vertically inside the chamber up position, or positioned horizontally outside the chamber down position. The machine must be thoroughly cleaned at the end of each working shift or at least daily. Never use steel wool to clean warewasher surfaces. Use only products formulated to be safe on stainless steel. First, push the off button. Now open the machine door. Clean off the dish tables in the dishwasher. Drain the machine by lifting up the drain lever. Thoroughly cleanse and flush the dishwash interior. Remove any remaining soil with a soft cloth or brush and mild cleanser. Rinse again. Remove and empty the strainer pan and the strainer bucket. Wash and rinse them thoroughly. Do not bang to clean. Clean the pump cover with a soft cloth or brush, do not allow food soil, utensils, straws, or other items to accumulate on the tank bottom. Remove the overflow tube. Wash and rinse the overflow tube inside and out. Make sure that the wash and rinse arms rotate freely and continue to turn for a few seconds after being whirled by hand and are free of any obstructions. If not, remove the arms and clear out any obstructions. The wash arms are easily removed for cleaning. To remove the lower wash arm, unscrew the hand knob and lift the rinse arm off. The wash arm can be lifted off once the rinse arm is removed. The upper wash and rinse arms are removed by unscrewing the hand knob and lowering both arms together. Be careful not to drop these arms. Note, do not bang wash or rinse arms to clean. Replace all removed parts, put wash arms on securely, leave the machine door open to allow the interior to air out and dry. Note, if either the strainer pan or the strainer bucket is not properly in place, obstructions such as food particles or bones may clog the wash arm nozzles. If the optional delime notification is activated, and the delime light is on, follow these instructions. Deliming is also necessary if deposits are visible inside or outside the machine. First, remove the racks, drain the tank, and press off. Press and hold cycle and on for three seconds. Close the door, the unit will fill, then indicate add delime. Open the door, add a delime agent per the supplier's instructions for a 14 gallon tank. Now, close the door. The pump starts, and the display flashes delime. After 12 minutes, the display scrolls drain. Check the interior, and close the door to run additional cycles if necessary. Finally, drain the tank and turn the unit off. Do pre-scrap dishes thoroughly. Do use only detergent recommended by your chemical professional. Do, at the end of the day, thoroughly cleanse the machine, rinse and dry, leave the door open. Do delime the machine on a regular schedule. Do use only products formulated to be safe on stainless steel. Do not use detergents formulated for residential dishwashers. Do not allow food soil, utensils, straws, or other items to accumulate on the tank bottom. Do not exceed chemical manufacturer's recommended concentrations for detergent, sanitizer, rinse aid, or lime scale remover. Do not use steel wool to clean ware or warewashing surfaces. Do not allow foreign objects to enter the unit, especially metallic contaminants such as paper clips, retainers, etc. Note, failure to follow use, care, and maintenance instructions may void your Hobart ware washer warranty. With proper operation, cleaning, and maintenance, your Hobart AM select will provide many years of reliable operation. This completes operator training for the Hobart AM select dishwashers. Any parts or service information concerning this product, contact your local Hobart service op.

Copy and paste the embed code above.

Watch this operator training video to learn the do's and don'ts of your Hobart AM15 select dishwasher.

Specs
Width 27 Inches
Depth 28 1/2 Inches
Height 66 1/2 Inches
Dishwasher Height Standard
Hertz 60
Phase 1
Voltage 208/240
Booster Heater Included Yes
Booster Wattage 8.5 Kilowatts
Dishwasher Style Straight / Corner
Energy Star Qualified Yes
High or Low Temp High Temp
Horsepower 2 HP
Made in America Yes
NSF Listed Yes
Racks Per Hour 58 - 65
Type Single Rack
Wash Cycle Time 60 - 360 Seconds
Wash Tank Capacity 14 gal.
Water Temperature 180 Degrees F
Water Usage 0.75 Gallons Per Rack

Details

Whether it's a delicate a wine glass or a grimy pot, the new Hobart AM15-6 select high temperature dishwasher is NSF certified to clean them all. The four washing cycles on the AM15-6 are 1, 2, 4 and 6 minutes long, and let you select the one that assures all your dishware, glassware and flatware is totally clean. With increased wash water pressure and the patented, 70 degree-rise, 8.5 kw Sense-A- Tem booster heater, the AM15-6 cleans and sanitizes everything the first time. The AM15-6 has features such as a new water and energy saving rinse system, a door- actuated start, and self- draining stainless steel pump and impeller. Core issues such as cost of ownership, productivity, and food safety have led us to design the AM15-6 to use less water, only 3/4 of a gallon per rack, than any other door-type warewasher on the market. The AM15-6 is also equipped with touch-pad controls that are simple for operators to access and use, and a deliming cycle with an optional notification capability. The AM15-6 is also very versatile, with models available to handle 18" x 26" sheet pans and large pots, hot water or chemical sanitization and 58- 65 racks per hour. The AM15- 6 includes an 8.5 kw booster heater and requires a 208/240/60/1 electrical connection.

Overall Dimensions:

Width: 27"
Depth: 28 1/2"
Height: 66 1/2"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order once it is placed.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Hardwired

    Hardwired

    This product must be hardwired; it does not plug into a standard wall outlet.

Spec sheet Specsheet Manual Manual Hobart's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register