$1,379.00/Each

  • Non-stick coating on regulator plate for easier cleanup
  • Built in sharpener; large receiving tray with indent to catch juices
  • 27/32" maximum slice thickness
  • 11 1/8" x 7 5/8" cutting capacity
  • ETL and NSF Listed
  • 3" of clearance between back of blade and motor for easy cleaning
  • Anodized aluminum solid adjustment knob
Item:
92240797
Units:
Each
Shipping:
Usually Ships in 1-2 Business Days
MFR Item:
40904
UPC Code:
029419836901

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

Companion Items

How to Clean a Slicer

How to Clean a Slicer

Welcome to Vollrath University! I'm Chef Rich and today we're going to talk about cleaning a slicer. In front of me, I have the industry standard; 12 inch blade, half horsepower slicer. This is the Vollrath 40797. The distinguishing feature of the Vollrath slicers is that we have the nonstick surfaces on all the food contact areas. This greatly reduces drag when slicing, but also aids in cleanup. To begin cleaning any slicer, always make sure the slicer is unplugged and the switch is off. Also make sure the gauge plate is in its fully closed position. Next, we want to open up the product tray and get that out of the way. We do that by removing this, and then opening up the tray. Next, we'll remove the blade face plate. We do this by removing the nut on the back side of the unit, and I don't remove this all the way. I actually use this when it's loose to push back against the face plate to make it easier to remove. Now I can remove the face plate. Now, we can go and clean the front side of the blade. Also, if we move the blade a little bit, we can clean the back side. On some Vollrath units, we have a safe blade removal tool, which I'll show you now. For Vollrath slicers that are equipped with the blade removal tool, first we have to make sure that we get the sharpening stones up and out of the way, this allows the removal tool to fit flush to the blade. Next then, we'll take the center of the blade removal tool and put it into the center of the slicer blade, making sure that the two pins on the tool fit into the two cutouts on the blade. We do this by centering the tool and then twisting until we see it into the blade. Next, we'll take the two screws and tighten them into the two points into the blade, make sure they're snug. I always make sure to shake it to make sure that it's securely fastened. When it is securely fastened now, we will simply back out the center nut and then remove it from the slicer. Now, we can clean the back side of the blade. Also, at this time we can clean the center of the slicer, as the bearings are sealed (if you can see inside this blue seal, that shows that the bearings are fully sealed), so here again, at this time we would go and clean the slicer, clean all the areas behind the blade, that normally are very, very difficult, if not impossible to clean, making that a very quick, easy, and once again, safe process. So now we have the blade removed. The way the safe blade removal system works is that the acrylic disc is actually slightly larger than the diameter of the blade. Therefore, the edge of the blade never exceeds the edge of the acrylic, making it safe now to handle. Without the safe blade removal system, I would never recommend removing the blade from the slicer. Now, let's re-assemble the slicer. We begin by placing the center of the blade removal tool into the center of the slicer. Next, we want to move the blade, and you'll actually hear it and feel it seat into place. Now, turn in the center nut on the blade, and you want to do that until snug. Now, we go and remove the blade removal tool by loosening these two nuts. Now, the tool comes off and we will re-assemble the face plate. We do this by simply putting the face plate into position and then on the back side again, inserting the screw, and tightening down the nut. Now, simply return the product tray to its position, and secure with the nut. That's how you, very quickly, and most importantly, safely clean your slicer using the Vollrath Safe Blade Removal tool.

Copy and paste the embed code above.

This video shows you how to clean your Vollrath slicer. This presentation will help you to efficiently, quickly, and safely clean the slicer blade, food tray, and other components.

Specs
Width 27 Inches
Depth 20 Inches
Height 18 Inches
Maximum Product Width 11 1/8 Inches
Maximum Product Height 7 5/8 Inches
Amps 2.5 Amps
Hertz 60
Phase 1
Voltage 120 Volts
Wattage 300 Watts
Blade Size 12 Inches
Horsepower 1/2
Installation Type Countertop
Operation Manual
Power Type Electric
Slice Size 1 1/4 Inches
Slicer Usage Mid Tier
Slices Cheese Yes

Details

This Vollrath 40904 12" manual gravity feed slicer features a 1/2 hp belt driven motor for medium to high volume cutting applications! It's great for slicing vegetables and processed meat too, making it perfect for delis, sandwich shops and busy restaurants. It will also accommodate an optional frozen blade for cutting frozen meats (sold separately). Its included Safe Blade Removal System helps users take the blade off safely for thorough cleaning.

This Vollrath 40904 slicer comes with an exclusive non-stick coating on the regulator plate that's great for cheese slicing and makes cleaning easier, and features a built-in sharpening assembly. A large cutting tray, and a maximum cutting capacity of items measuring 11 1/8"W x 7 5/8"H allows an extra measure of versatility. The body is made of durable anodized aluminum.

The Vollrath 40904 is suitable for cutting processed meats for up to 3 hours per day, and can cut some cheese, for up to 1 hour per day. This 12" manual gravity feed slicer requires a 110V electrical connection, and is ETL and NSF Listed.

Overall Dimensions:
Width: 27"
Depth: 20"
Height: 18"

The Vollrath 40904 replaces the 40797 slicer and incorporates design enhancements to meet the latest NSF standards.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please note this in the comment section while checking out! Please feel free to log on to our Live Chat should you have any questions before placing your order. After your order is placed, we will update you via email to let you know how this will be shipping to you.

Certifications

NSF Listed ETL US & Canadian

NEMA Plug

5-15P

Downloads

Spec Sheet Specsheet Manual Manual

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Resources

Related Items

Customers Also Viewed

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register