First install a 3/8 MPT right angle adapter with a 3/8 compression thread, note this is not supplied by Advance Tabco. Screw the adapter into the back of the faucet and tighten it with a wrench so that the adapter is facing downwards as shown. Next, install a 3/8 grated flex hose to the compression thread end of the adapter and tighten it with a wrench. Now install the half inch end of the grated flex hose to the top adaptor on the valve as shown. Please note the grated hoses are not supplied by Advance Tabco. Use a wrench to tighten. Continue to install two additional hoses to the remaining adaptors on the valve. We will be showing where the other ends of these hoses are attached shortly. Next we are going to install the tail piece to the drain. First attach the nylon insulating washer to the top of the tail piece and slide the block knot over. Screw the tail piece onto the drain as shown. Use a wrench to tighten. Please note that the tailpiece is not provided by Advance Tabco.

Copy and paste the embed code above.
Watch how to correctly hook up the plumbing on your Advance Tabco 7-PS-63 hand sink!

Related Videos

Advance Tabco 7-PS-63 Drain Installation
Advance Tabco 7-PS-63 Drain Installation

This quick video shows you how to properly install the drain on your Advance Tabco 7-PS-63 hand sink!

Advance Tabco 7-PS-63 Faucet Installation
Advance Tabco 7-PS-63 Faucet Installation

Watch how to install the faucet on your Advance Tabco 7-PS-63 hand sink.

Advance Tabco 7-PS-63 Mounting Installation
Advance Tabco 7-PS-63 Mounting Installation

Watch this video to see how to properly mount the 7-PS-63 hands free hand sink from Advance Tabco.