$478.99/Each

Accessories & Options

  • NSF Listed
  • 8" high backsplash; D spout faucet included
  • Made in America
Item:
1097PS63
Units:
Each
Shipping:
Usually Ships in 2-4 Weeks
MFR Item:
7-PS-63

Companion Items

Advance Tabco 7-PS-63 Mounting Installation

Advance Tabco 7-PS-63 Mounting Installation

To mount the unit, first install the z-bracket wall clip to your desired location. Securely tighten the bracket, ensuring that it is level. The holes are provided for additional mounting security. Carefully mount the sink onto the wall bracket as shown, making sure it is firmly in place. We are now going to install the cold water supply. Note when facing the unit the cold supply is the hose on the left of the valve. Attach the hose to your incoming cold water supply and tighten it with a wrench. The last hose remaining is the hot water supply which is located on the right side of the valve when facing the unit. Attach the flexible hose to your incoming hot water supply and tighten with a wrench. The final step is to install the p-trap onto the tail piece installed earlier. First slide the locking nut on to the tail piece followed by the rubber washer. Next place the p-trap onto the tail piece as shown and securely tighten. Please note that the p-trap is not provided by Advance Tabco.

Copy and paste the embed code above.

Watch this video to see how to properly mount the 7-PS-63 hands free hand sink from Advance Tabco.

Advance Tabco 7-PS-63 Plumbing Installation

Advance Tabco 7-PS-63 Plumbing Installation

First install a 3/8 MPT right angle adapter with a 3/8 compression thread, note this is not supplied by Advance Tabco. Screw the adapter into the back of the faucet and tighten it with a wrench so that the adapter is facing downwards as shown. Next, install a 3/8 grated flex hose to the compression thread end of the adapter and tighten it with a wrench. Now install the half inch end of the grated flex hose to the top adaptor on the valve as shown. Please note the grated hoses are not supplied by Advance Tabco. Use a wrench to tighten. Continue to install two additional hoses to the remaining adaptors on the valve. We will be showing where the other ends of these hoses are attached shortly. Next we are going to install the tail piece to the drain. First attach the nylon insulating washer to the top of the tail piece and slide the block knot over. Screw the tail piece onto the drain as shown. Use a wrench to tighten. Please note that the tailpiece is not provided by Advance Tabco.

Copy and paste the embed code above.

Watch how to correctly hook up the plumbing on your Advance Tabco 7-PS-63 hand sink!

Advance Tabco 7-PS-63 Drain Installation

Advance Tabco 7-PS-63 Drain Installation

First prepare the drain for installation by applying plumber’s putty as shown. Next insert the drain into the bowl and hold it firmly in place. Apply the rubber seal, paper gasket, and the locking nut provided. Ensure the locking nut is secure by tightening it.

Copy and paste the embed code above.

This quick video shows you how to properly install the drain on your Advance Tabco 7-PS-63 hand sink!

Advance Tabco 7-PS-63 Faucet Installation

Advance Tabco 7-PS-63 Faucet Installation

Advance Tabco supplies a K121 faucet with the sink. First install the spacer on the faucet, insert the faucet directly into the hole. Next place a rubber grommet, serrated lock washer, and hex nut on the rear side of the faucet. The hex nut should then be tightened with a wrench.

Copy and paste the embed code above.

Watch how to install the faucet on your Advance Tabco 7-PS-63 hand sink.

Advance Tabco 7-PS-63 Knee Valve Installation

Advance Tabco 7-PS-63 Knee Valve Installation

Upon arrival the unit comes with the knee valve installed backwards for adding shipping protection. First remove the knee valve by unscrewing it from the mounting bolts on the unit. The next step is to install three brass pipe thread adapters into the knee valve as shown. Please note that these adapters are not supplied by Advance Tabco. Use a wrench to tighten the adapters securely. It’s now time to install the knee valve into the sink. First insert the knee valve through the opening in the sink as shown. Next, secure the valve on the unit with the nuts and bolts provided. Use a wrench to tighten.

Copy and paste the embed code above.

This video shows you how to correctly install the knee valve for the Advance Tabco 7-PS-63 hands free hand sink.

Advance Tabco 7-PS-63 Mixing Valve Adjustments

Advance Tabco 7-PS-63 Mixing Valve Adjustments

We will now adjust the mixing valve. Mixing valve is located under the knee valve. In order to adjust water temperature, lift knee pedal and insert screwdriver into slot located underneath as shown. Rotate screwdriver until desired temperature is achieved.

Copy and paste the embed code above.

This quick video shows you how to set the correct temperature by adjusting the mixing valve on the 7-PS-63 hands free hand sink from Advance Tabco.

Specs
Length 12 1/4 Inches
Width 16 Inches
Height 16 1/8 Inches
Bowl Depth 5 Inches
Bowl Front to Back 9 Inches
Bowl Left to Right 9 Inches
Faucet Included Yes
Gauge 18 Gauge
Made in America Yes
Material Stainless Steel
NSF Listed Yes
Number of Compartments 1
Stainless Steel Type Type 304

Details

Thanks to its knee operated design, this Advance Tabco 7-PS-63 Space Saver hands free hand sink helps reduce the risk of cross contamination in your busy commercial kitchen or industrial location.

The Advance Tabco 7-PS-63 Space Saver hands free hand sink is made of durable 18 gauge 304 series stainless steel and features a keyhole style mounting bracket that allows for easy installation and greater support than traditional bracket designs. A D spout faucet is pre-installed on the hands free hand sinks 8" high backsplash. Consult the Specification Sheet for additional details and installation requirements.

Overall Dimensions:
12 1/4" Left to Right
16" Front to Back
16 1/8" High

Compartment Dimensions:
9" Left to Right
9" Front to Back
5" Depth

Also known as 7 PS 63, or 7PS63.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please note this in the comment section while checking out! Please feel free to log on to our Live Chat should you have any questions before placing your order. After your order is placed, we will update you via email to let you know how this will be shipping to you.

Awards

Best in Class

Certifications

NSF Listed Made in America

Downloads

Spec Sheet Specsheet Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Related Items

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register