To mount the unit, first install the z-bracket wall clip to your desired location. Securely tighten the bracket, ensuring that it is level. The holes are provided for additional mounting security. Carefully mount the sink onto the wall bracket as shown, making sure it is firmly in place. We are now going to install the cold water supply. Note when facing the unit the cold supply is the hose on the left of the valve. Attach the hose to your incoming cold water supply and tighten it with a wrench. The last hose remaining is the hot water supply which is located on the right side of the valve when facing the unit. Attach the flexible hose to your incoming hot water supply and tighten with a wrench. The final step is to install the p-trap onto the tail piece installed earlier. First slide the locking nut on to the tail piece followed by the rubber washer. Next place the p-trap onto the tail piece as shown and securely tighten. Please note that the p-trap is not provided by Advance Tabco.

Copy and paste the embed code above.
Watch this video to see how to properly mount the 7-PS-63 hands free hand sink from Advance Tabco.

Related Videos

Advance Tabco 7-PS-63 Plumbing Installation
Advance Tabco 7-PS-63 Plumbing Installation

Watch how to correctly hook up the plumbing on your Advance Tabco 7-PS-63 hand sink!

Advance Tabco 7-PS-63 Drain Installation
Advance Tabco 7-PS-63 Drain Installation

This quick video shows you how to properly install the drain on your Advance Tabco 7-PS-63 hand sink!

Advance Tabco 7-PS-63 Faucet Installation
Advance Tabco 7-PS-63 Faucet Installation

Watch how to install the faucet on your Advance Tabco 7-PS-63 hand sink.