Add this item to your cart. (You can remove it at any time.)

Why do we do this?

UPC Code:




Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Nemco Can Opener

Nemco Can Opener

Let’s face it; nobody likes the task of opening a bunch of cans. With a standard can opener, the job is a real chore. What’s worse is that a regular can opener can leave you with dangerous sharp edges and you can even leave metal shavings behind in the food you’ll be serving. Hi, I’m Steve Ziegler, product expert at the WEBstaurant Store. In this demonstration I’m going to show you how the Nemco CanPro can opener can make the job of opening cans easy, safe, and sanitary. Let’s take a look. One thing I want to mention before we begin is you’ll notice this Nemco CanPro can opener is more expensive than the cheapest restaurant can openers out there. There are very good reasons for that. Let me just tell you about two of them right now. First of all, this has a very heavy, stainless steel construction, not that cast aluminum stuff you get with the cheapest can openers. The other thing is that this is NSF approved, so if sanitation is an important issue to you, this is the can opener for you. Alright, now to cut a can. First thing you’re going to do is you’re going to lift the unit up, and slide the can back against the base and put the unit back down on the can. Now, you’re going to take this lever and you’re going to push it down gently. There is no need to slam it like you would with a regular can opener. And we’re going to go for a number ten can, we’re going to go six revolutions. Now when you do this, when I did it the first time, it felt like I wasn’t doing anything at all, so don’t be fooled. Just go ahead and do your six revolutions. One, two, three, four, five, six. That is so easy, so much easier than a regular can opener. I’m going to lift my lever again, pull this out, and just take a look. It felt like we didn’t do anything, but there you have it. You can see, this is a nice edge and it doesn’t hurt, it doesn’t cut at all, and the lid did not fall down into the can. It’s as easy as that. When the blade in your Nemco CanPro can opener becomes dull, the easiest way to switch it out is to purchase a new cutter housing. In fact, when you buy a CanPro can open, I recommend you get a cutter housing with it, that way you’ll never have any down time. This is how you’ll switch this out. All you have to do is lift the lever, release the pin on the side, you can bring the cutter head up, and pull this cutter housing right out. Then get your new unit. That just slides right in, and you can see this is much easier than changing the blades on an old number one can opener. Replace your pin and you are all set to go. To replace just the cutter blade in your Nemco CanPro can opener, what you’ll do is you’ll release this lever, pull the pin, lift your head up, and slide out the cutter housing. Now, you’ll see on your cutter housing, it’ll actually tell you which way is tight and which way is loose, and it’ll show you on both sides. You’ll just use your wrenches to take this apart and you can see this diagram here shows you exactly how to do it.

Copy and paste the embed code above.

This Nemco manual can opener will lessen the stress on your elbows and let you say goodbye for good to "lift, slam, puncture, and rip" can opening methods! See just how easy this can opener is to use and learn how change the cutter housing.


The Nemco 56022A CanPRO replacement cutter housing assembly is for the Nemco CanPRO Compact, which is sold separately.

Nemco 56022A is formerly known as Nemco 56022.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

Related Items

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register