$22.99/Each

  • Blade assembly includes 15 blades
  • Made in America
Item:
591316TPT
Units:
Each
Shipping:
Usually Ships 1 Business Day
When will I receive my Item?
MFR Item:
316-TPT
Tomato Slicer Blade Replacement

Tomato Slicer Blade Replacement

Changing blades on your tomato slicer is a quick and easy way to make your old tomato slicer cut like it’s brand new. Here are some easy instructions. First, remove the thumb screws and the slide stop from the end of your slide board. Then you’ll remove the pusher block assembly. You’ll see, this just slides right off. Next, remove the blade holder assembly by unscrewing the hex-head bolts on either side of the blade holder casting. Now be careful removing the blade holder assembly so that you don’t touch the sharp edges of the blades. Now, take your new blade set assembly, and insert the blades into the casting with the sharp side toward where the pusher assembly normally sits. Make sure the holes at either end of the assembly align with the holes of the blade holder casting. First, insert the two hex-head screws on the right end of the blade holder, nearest the words “caution sharp blades.” Fully tighten these two, alternating a quarter turn until they are fully tightened. Then, install the screws on the other side of the casting. Again, tighten each screw a quarter turn, alternating until fully tightened. Finally, reinstall the pusher block assembly by simply sliding it on. Once you’ve done that, you can move the pusher block through the blade set to make sure it’s installed properly. Then you’ll reinstall the slide stop with the thumb screws. Now that you’ve seen how easy it is to change the blades on your tomato slicer, I have one more recommendation: You must have an extra set of blades on hand at all times. You never know what could happen, and if you count on sliced tomatoes, you can really make your life easier by having an extra set of blades. Thanks for watching, and please, if you have any question, feel free to use our live chat button!

Copy and paste the embed code above.

Need to replace the blade on your tomato slicer? Check out this step-by-step visual demonstration to learn how!

Details

The Nemco 316-TPT 3/16" replacement blade assembly is constructed of razor sharp stainless steel. Each blade assembly comes pre-assembled with 15 blades.

This 3/16" tomato slicer replacement blade assembly is designed to fit the Lincoln Redco Tomato Pro Cutter and the Lejo Tomato Tamer only.

This item is also known as 316TPT.

Similar to Vollrath Redco 653.

Certifications

Made in America

Downloads

Nemco's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Related Items

Customers Also Viewed

Have you used this product?

Log in to write your own review and earn up to $16.00 with video, photo, and text reviews!

Login or Register

Find Related Products

pizza cutter replacement blade