$13,132.35/Each

Contact us for pricing

Why do we do this?

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

Accessories & Options

*
*
*

  • Grinds 55-60 lb. of beef per minute; 60-65 lb. of pork
  • Wedge cylinder grinding end ensures full rate feeding
  • 208V, 3 phase

UPC Code:

400010775736

Condition:

New
Shipping:

Usually Ships in 2-4 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Hobart 4246 Mixer/Grinder

Hobart 4246 Mixer/Grinder

The following operation trainer on the Hobart Model 4246 Mixer Grinder is a supplement to the Instructions Manual that came with your Hobart Mixer Grinder. If you have any questions concerning operation, please consult your manual. Your Hobart 4246 Mixer Grinder is constructed and designed to give long satisfactory service providing it is properly used and maintained. This training video will cover the controls of the 4246 mixer grinder its operation cleaning and maintenance. The electrical controls of the 4246 mixer grinder consists of front mounted water resistant rocker switches. This is the mixer start switch which will start the mixing on. Pressing the mix/grind switch operates both the mixing arm and the conveyor screw. All operations are stopped when the stopped switch is depressed. Operations are also stopped if the inner lock copper lid is raised. A foot control selector switch is also located on the front control panel. In the on position the foot control must be used to operate the mixer grinder and the machine will run in the mix grind mode only. When the foot control connector switch is put in the off position the other front mounted front mounted start stop rocker switches are active. Note if the front control switch is on the two start switches will be inoperable and the stop switch will stop the machine for as long as it is held depressed. Warning, if disassembled for cleaning or repair, the foot control unit must be completely reassembled as manufactured. Contact your Hobart Sales and Service center for assistance. Prior to operation the light and plate need some preliminary lubrication rub towel or mineral oil over the cutting surfaces of these parts. Knives and plates must be sharp and true for proper cutting action. The wedge cylinder is marked top and bottom. Before operating be sure top is visible. Two studs on the front of the hopper allow storage of the spanner wrench and the foot control. A 4246 has a normal total hopper capacity of 140 pounds depending on the type of meat or product to be processed. Meat may be mixed in the hopper for any desired length of time. During the mix only period the mixing arm operates and the hopper conveyor screw does not operated. Continue with self feeding occurs along with the mix grind operation. To shut the hopper lid lift the locking catch on the front hinge while holding the lid itself with your other hand. Warning unplug the mixer/grinder from the electrical power supply before beginning any cleaning procedure. Model 4246 mixer grinder is designed for easy cleaning. Stop the mixer grinder and unplug the electrical power source before cleaning or servicing. The following components must be removed when cleaning the 4246. Mixing arm, end ring, knife, plate, and conveyor screw. Use the spanner wrench to loosen the adjusting ring and to withdraw the plate, knife, and conveyor screw. The rubber seal at the dry end of the drive end of the conveyor screw inside the hopper should be removed by hand for cleaning. Grasp the outer flange or use a dull screw driver tip and pull the seal out. Warning before removing the mixing arm, make sure the machine is disconnected from electrical power. Next, loosen the two retaining nuts and loosen and remove the busing retain. Raise the hopper lid, disengage the mixing arm from the square drive and lift the arm from the hopper. The machine can be washed down and santized per your normal practice. Note, care must be taken that water or steam are not sprayed into louvers on the right side of the grinder. Any cleaning operation, the machine equipped with a power supply cord the receptacle should be sealed. Place the cover cap into position, turn the screw-type sealing ring clockwise. The mixer grinder has heaters in the electrical box and operator panel to keep the controls dry. These are automatically on when the unit is electrically connected. The mixer grinder should always be connected except when cleaning or disassembling the unit. After cleaning reconnect the electrical power supply. The concludes operator training for the Hobart 4246 mixer grinder. To obtain service and parts information concerning this mixer contact your local Hobart service office.

Copy and paste the embed code above.

Watch this operator training video to learn about the controls, operation, and cleaning procedures for the Hobart 4246 Mixer/Grinder.

Specs
Width 24 Inches
Depth 38 1/2 Inches
Height 71 5/16 Inches
Hertz 60
Phase 3
Voltage 208
Capacity 55 - 60 lb. per minute
Horsepower 1 - 5 HP
Hub Size #32
Power Type Electric
Type Meat Choppers / Grinders

Customer questions about this product

What do I need to do to complete my order for this meat grinder / chopper?
Under “Accessories & Options” (top right of the page), any fields marked with an asterisk (*) MUST be selected at time of order; you need to choose one of the available options in that field for the product to work properly. However, you can find all of our available options on the site too. If, for example, you wanted to order several different grinder plate sizes, you can find additional ones in our Meat Grinder Accessories category!
Ask your own question!

Details

Boasting a 140 lb. meat capacity, the Hobart 4246-1 # 32 meat grinder / mixer is perfect for heavy duty meat prep! This stainless steel grinder / mixer can grind 55 to 60 lb. of fresh boneless beef per minute through a 1/8" plate, and 60 to 65 lb. of pork per minute through a 3/16" plate (plates sold separately). Its exclusive wedge cylinder grinding end ensures full rate feeding for the entire meat batch. The grinding end is sized for use with # 32 knives and plates (sold separately).

To deliver fast results every time, this machine is powered by two separate drive systems: a 5 H.P. grind motor and a 1 H.P. mix motor. For safety, both drive systems simultaneously stop when the Stop switch is depressed.

For ease of cleaning and sanitation, this unit's mixing arm, conveyor screw, cylinder, and conveyor screw drive shaft are all easily accessible and readily removable. For added convenience, this unit features up-front, easy to reach controls and an easily converted hopper lid for right or left side loading. Its grinder hopper is constructed of glass bead finished stainless steel for added durability. The Hobart 4246-1 # 32 meat grinder / mixer requires a 208V, 3 phase electrical connection.

Overall Dimensions:
Width: 24"
Depth: 38 1/2"
Height (including hopper): 71 5/16"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order once it is placed.

  • UL Listed

    UL Listed

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • 15-30P

    15-30P

    This unit comes with a NEMA 15-30P plug.

Spec Sheet Specsheet Manual Manual Hobart's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register

Find Related Products

anvil meat grinder     hamilton beach meat grinder     hobart meat grinder