$3,127.00/Each
Contact us for details
Ships free with PlusCall 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)
Earn up to $93.81 back (9,381 points)with a Webstaurant Rewards Visa® Credit Card
Installation Services
Check if installation is currently available for your area.
Product Overview
- 12.73 cu. ft. capacity; holds up to 8 milk crates
- Exterior thermometer for easy temperature monitoring
- One-piece, reinforced stainless steel floor
- Doors and lids are self-latching and include safety bumpers
- R290 refrigerant; 115V; 1/3 hp
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
$438.49/Set
$120.75/Each
$120.75/Each
- Quantity
- 1/Each
- Shipping Weight
- 255 lb.
- Width
- 34 Inches
- Depth
- 30 5/8 Inches
- Height
- 41 1/8 Inches
- Interior Width
- 31 Inches
- Interior Depth
- 27 Inches
- Interior Height
- 25 3/4 Inches
- Amps
- 2.2 Amps
- Hertz
- 60 Hertz
- Phase
- 1 Phase
- Voltage
- 115 Volts
- Access Type
- Single Sided
- BTU Per Hour
- 1,224 BTU
- Capacity
- 12.73 cu. ft.
- Compressor Location
- Bottom Mounted
- Crate Capacity
- 8 Crates
- Door Style
- Swing
- Door Type
- Solid
- Exterior Material
- Stainless Steel
- Features
- Made in America
- Finish
- Stainless Steel
- Horsepower
- 1/3 HP
- Interior Material
- Stainless Steel
- Number of Doors
- 1 Door
- Plug Type
- NEMA 5-15P
- Refrigerant Type
- R-290
- Refrigeration Type
- Cold Wall
- Temperature Range
- 36 - 40 Degrees F
Customer questions about this product
Does Beverage-Air warrant this item for use in a food truck?
This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.
What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Beverage-Air SM34HC-S Details
Great for cafeteria settings, the Beverage-Air SM34HC-S 34" milk cooler ensures that milk is stored properly and easy to access. It's built with a stainless steel exterior and interior and features standard stainless steel lids, doors, adjustable hinges, and door latches. Overall, the total stainless steel design ensures maximum durability. The heavy-duty epoxy-coated steel wire floor racks also help preserve the cooler's structural integrity, as they support the (8) 13" x 13" x 11" or (4) 19" x 13" x 11" milk cases that the cooler holds.
This model is built with a 1/3 hp refrigeration system that circulates eco-friendly R290 refrigerant. R290 is a specialized refrigerant with an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3. The cooler interior is maintained at temperatures between 36 and 38 degrees Fahrenheit, so you can be sure that milk is safe. Plus, the self-latching doors seal tightly with flexible compression gaskets, preventing cold air from escaping. An exterior thermometer and full electronic control make it easy to monitor and adjust the cooler during the day, as well.
At the end of the school or business day, use the 4" heavy-duty plate casters to roll the cooler aside to clean or perform routine maintenance. To keep the unit in place during the day, 2 of the casters include brakes. Plus, the doors and lids are outfitted with safety bumpers to eliminate sharp corners, ensuring that the unit is easy to move to the back-of-the-house whenever needed. Use the cylinder lock to secure the unit during off hours, and to keep the unit looking and performing in tip-top shape, take advantage of the centrally-located floor drain. Not only does this connect to a drain hose and hose adapter, but it simplifies cleaning. The cooler requires a 115V electrical connection for operation.
Overall Dimensions:
Width: 34"
Depth: 30 5/8"
Height: 41 1/8"
Capacity: 12.73 cu. ft.
Interior Dimensions:
Width: 31"
Depth: 27"
Height: 25 3/4"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Made in America
This item was made in the United States of America.
UL Listed, US & Canada
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.
UL Classified EPH
This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.
UL Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
5-15P
This unit comes with a NEMA 5-15P plug.
Resources and Downloads for
Beverage-Air SM34HC-S
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
Note: Please refer to the warranty document linked to this item for Beverage Air’s most recent warranty statement. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.