Quick Shipping

Usually ships in 1 business day

Product Overview

  • 6" spout with pail hook, support brace included
  • Wall mounted base with 8" adjustable centers (7 1/4" - 8 3/4"), integral service stops and 1/2" NPT female inlets
  • Ceramic disc cartridge protected with a lifetime warranty
  • Cast brass faucet body with chrome-plated finish
  • Vandal-resistant lever handles
UPC Code:Z843M1-XL

Zurn Elkay Z843M1-XL Specs

Quantity
1/Each
Shipping Weight
6.4 lb.
Spout Length
6 Inches
Faucet Centers
8 Inches
Features
ADA Compliant  NSF Listed
Handle Type
Lever
Mounting Style
Wall Mounted

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

Zurn Elkay Z843M1-XL Details

This Zurn Elkay Z843M1-XL wall mount service sink faucet delivers superior quality and durability in any installation. This model boasts a 6" cast spout with a hook that provides a sturdy place to fill buckets and pails for janitorial and utility needs. Additionally, it comes with a chemical-resistant vacuum breaker that prevents harmful backflow from entering and potentially contaminating your potable water supply. The water flow is controlled with a set of color-coded, vandal-resistant lever handles that let you adjust for the desired mix of hot and cold water. For added peace of mind, the cartridge uses a ceramic disc design that provides superior wear resistance compared to a standard compression seat washer design, and it carries a lifetime replacement warranty.

It also has a support rod which braces the spout against the wall, preventing stress and damage on the connection points as heavy pails of water are filled. This faucet installs with a set of 1/2" NPT female connections on 8" adjustable centers, and integral service stops let you easily shut off the water supply to the faucet when it's time to perform routine maintenance, without affecting the rest of the building. The faucet body is made from cast brass with a smooth chrome-plated finish.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • CSA, US and Canada

    CSA, US and Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

  • ASSE Certified

    ASSE Certified

    This product has been certified by ASSE International to meet safety and performance standards for plumbing and mechanical systems