Name: Waterloo Wall-Mounted Pot and Kettle Filler with Single Inlet and 24" Double-Jointed Swing Spout
Brand: Waterloo
SKU: 750PF24DJ
Price: 159.99 USD
Availability: InStock

Only

$159.99/Each

Ships free with Plus

Quick Shipping

Usually ships in 1 business day

Product Overview

24" double-jointed spout with 2 GPM aerator
Wall-mounted, single inlet with 1/2" NPT inlet
Temperature rating 40 - 180 degrees Fahrenheit
Heavy-duty chrome-plated brass construction

UPC Code:400013805607

View all Waterloo Pot / Kettle Filler Faucets

plus
Easyflex White PTFE Thread Seal Tape 1/2" x 520"
$1.29/Each

Quickly and easily set up your steam tables and kettles with this Waterloo wall-mounted pot and kettle filler!

With heavy chrome-plated brass faucet bodies, ceramic cartridges engineered for durability, and certifications from a wide range of national and local regulatory agencies, you can install this model with confidence. To give you total peace of mind, it comes with a 3-year replacement warranty.

1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
CSA, US and Canada
This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

Consistent Flow Rate

A 2 GPM aerator provides a consistent flow rate and minimal splashing. The wall-mounted design is easy to install, and it comes with a single 1/2" NPT inlet.

Range of Motion

This faucet features a 24" double-jointed swing spout that gives greater range of motion than a standard swing nozzle, with the added benefit of allowing you to fold it out of the way to accommodate large, bulky items.

Watertight Seal

This faucet uses a ceramic cartridge, which provides a much lower fail rate than the compression cartridges widely used in the industry. In this design, 2 ceramic discs fit together to create a watertight seal when closed. This removes the need for a rubber seat washer, which is one of the most frequently replaced parts on a faucet. A vertical handle makes it easy to turn the water flow on and off.

Brand You Can Trust

Waterloo products provide the industry-leading quality you expect. With heavy chrome-plated brass faucet bodies, ceramic cartridges engineered for durability, and certifications from a wide range of national and local regulatory agencies, you can install Waterloo products with confidence. And to give you total peace of mind, this model comes with a 3-year replacement warranty.

Customer Q&AAsk a Question

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

What parts do I need to install my new faucet?

For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!