• Free Shipping!  

$10,887.60/Each

Add to cart or login. (You can remove it at any time.)

Why do we do this?

Features:

  • Stainless steel exterior and interior
  • 70 / 30 split belt with individually adjustable speed settings
  • Includes (2) 6" conveyor extensions

UPC Code:

400011034870

Condition:

New
Shipping:

Usually Ships in 3 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Turbochef High H Maintenance

Turbochef High H Maintenance

Warning, this oven operates at approximately 500 degrees Fahrenheit and may cause injury if not allowed to cool properly. To begin cleaning make sure your oven is in the off position and cool. This video is going to contain the daily maintenance for the High H maintenance conveyer series, the 1618, the 2020, and the 2620 units. There are slight differences in between the models when it comes to cleaning and disassembling, and we’ll get to those in a moment. What we’re going to do is we’re going to pull the fenders off, the chain guard, and the crumb tray underneath. We’re going to replace that and get that out of the way. I’m going to open the door by just removing these latches, spin to come out, lift straight off. Then im going to palm my plates out. It doesn’t matter where they go because they are interchangeable, top and bottom. You do that by just pulling the handle, make sure to use two hands because they can get a little heavy. We’re going to come around here and do the same thing, pull the crumb tray and the extender out. Then pull the last chain door off. The 1618, I’m sorry the 2020 and the 2620 have the second cog and chain set, which is basically for the split belt assemblies. If there is no split belt on either one of the ovens then you won’t need this chain. It’ll be on the other side. So now we’re going to work on moving the conveyer assembly. To do that we’re going to lift up, grab hold of the chain, and this takes a little practice here, lift it, pull it off. Then we’ll go back to the other side, then I can lift the entire assembly up, push that forward and pull the chain off. Leave the chains there. Grab the unit with both hands and pull out and place on cart to be cleaned. We’re going to be cleaning all these parts with approved TurboChef oven cleaner. This jet plate, both of them, the top can be pulled off by lifting on one side of the handle and pushing back. This way we can spray this and allow it to set while this piece is generally clean and doesn’t get used regularly. To clean the interior cavity of the oven I’m just going to grab a paper towel and get some of this debris and just sweep it out, then I pick that up a little bit later. A lot of this debris I can get out rather easily. Then I’m going to take my TurboChef oven cleaner and a wet towel and spray the cleaner directly onto the towel. Trying to avoid spraying directly in the oven because in the very back is the catalytic converter that allows this oven to be ventless. So I’m going to place this on and let this soak in for about 5 minutes, use more if necessary. Try to avoid getting any on the catalytic converter. Top and bottom, and even in the back where the catalyst goes. You can see how well it starts working. Make sure you wear protective gloves, and you may want to put a mask on if the fumes are a little too much. We’ll let that rest for 5 minutes and we’ll come back in and scrub. After 5 minutes, go in with a Freon scrubby and really use some elbow grease on the surfaces. It’ll affect some of the caked on foods. Stay away from the cattles in the back of the oven, doing your best to get all the sides as clean as you can get it, and that looks pretty good. After scrubbing I got a pool of warm water and another clean towel just to go ahead and really get all the oven cleaner and leftover grime on the oven. You want to just really rinse and get all the chemicals out. I do the same for all the parts in the back, the jet pipes, scrubbing them as well as the belt, rinsing that with a dish hose, and we’re ready to reassemble. Prior to reassembly, we recommend you take a clean rag and TurboChef oven guard and spraying on covering all surfaces. This will make it easier for you to clean it next time. Prior to reassembly we recommend that you use oven guard on both the top and bottom jet plates that’ll help with food sticking to it. Don’t apply the oven guard to any other part like the conveyer because that’s where food service is, where it comes in contact with food. We also recommend that you put oven guard on the interior surface of the door, this too will also prevent future food particles to get stuck to it. When reassembling you’ll notice at the top half that there’s an air duct that connects to the left, you will try to connect that air duct at the top with the piece, the jet plate. To line that up it helps to bring your hand right here when you’re bringing the plate in to help guide it into the orifice. I’m replacing the jet plates back into the oven. I’m going to start with my top first although it doesn’t matter which order you go in. to do that I’m going to be flipping it this way and this is the part that needs to go in the orifice and shot so this here there’s a hanger inside the oven that when you get about halfway it’ll hold it for you. I’m going to use my hand to hold and guide that in. Once it is seated and flushed with the front, take this and over this lip here just press that into place to lock it. We’ll take our second one and try to line it up with the other lid and lock it in place. Now we’re ready to place our belt assembly back into the unit, now I have both my cogs facing the unit, I’m going to pick this up, notice here this is the indented spot where it slides over the oven cavity. So we’re going to line that up as best we can and just slide it into place. To connect the chains we’re going to start with the right hand side and we’re going to lift this up and push it forward a little bit, and we’re going to pull it back in its seats. Now we’re connected. On the opposite side, we’re going to lift, place, and set down. Now the belt is connected and ready to operate. Next we’re going to place the door. There’s two pins here and here, and two hinges, little tricky but you have to place them so that they rest over and slide into place. Close the door with the latches and lock into place. Then we’ll take our ancillary items, like the crumb trays, and slide one into each end, with the thumbhole facing forward so you can pull it out easy next time. Right into there. Next are two chain covers. There’s one that is much larger, looks like this, this is going to be the left hand side if you are looking at the other, this groove here slides over the conveyer and cogs and perfectly seats. On the right-hand control side, this one here also feels the same way and has a little bit of a nipple at the end here. This will place over on the conveyer side, slide in, and the nipple seats right there in the notch. Next you are going to place the two extenders on; these should just slide over here and flip, and the same thing on the opposite side. The conveyer oven is now completed and ready to operate. As part of your daily maintenance, in the rear of the oven there are two filters, one on each side they simply lift up and can be hosed off, dried, and reinserted. Those are your air intakes and should be cleaned at all times. Warning, this oven operates at approximately 500 degrees Fahrenheit and may cause injury if not allowed to cool properly.

Copy and paste the embed code above.

In order to always be confident that you are serving your finest foods out of a clean and sanitary oven, watch this tutorial on TurboChef High H conveyor oven maintenance!

Turbochef HHC2020 Conveyor Oven

Turbochef HHC2020 Conveyor Oven

Thanks for tuning in again to FoodTrends Live! I'm Casey McAuliff with Turbo Chef Technologies and we are here now to talk about the TurboChef 2020 conveyor oven. When I say TurboChef 2020 conveyor, what I mean is that my cooking surface is 20 inches wide and my cooking chamber is 20 inches long. That is where we get the 2020 nomenclature. This oven is actually configured with a 50/50 split belt, which means that I have (2) 9 1/2 inch belts that can run at various speeds in order to run different types of products through the same oven cavity. What's unique about TurboChef's conveyor is that we're utilizing independent air flow. This means that I can control my top air and my bottom air separately of each other to get the proper bake. On a product like a pizza, there's usually more bottom air than top air. Right now, this oven is in what we call a sleep mode or idle state and all I need to do to wake it up is press this idle button. When I press the button, the fans come on. When the unit is idle, it does not reduce cavity temperature. The only thing that happens is that the fans and belt slow down. When I press the idle button to wake it up, it only takes 3 seconds for the fans to come back up to RPM and the oven is ready to cook again. When the unit goes into that idle state, it's saving you 30 percent on your energy bill! I have a large pizza here. There's raw dough with pepperoni and sausage toppings. My belt is set to 3 minutes for this product. I simply place the product on the belt and it's going to pass through the chamber. This oven doesn't have any microwave energy, as it's only air impingement from both the top and the bottom. Now, our pizza has exited the cavity so I can now press the idle mode and put the machine back to sleep to save money on my energy bill. Our pizza looks ready with its nice golden brown top and bottom. There's even browning all the way across our pizza and this was cooked about 40 percent faster than a standard conveyor oven without the need of a vent hood. With the dual independent air control, it's really easy to dial the oven in for different products on your menu. To demonstrate the split belt capabilities of the 20/20, I have frozen French fries on the rear belt that is set to 3 minutes and ciabatta sandwiches with turkey and cheese on the front belt that is set for 1 minute and 10 seconds. Notice that even with the different cook times, they are still going through the same oven to get more cross-utilization out of one product on your kitchen counter. After 1 minute and 10 seconds, you can see our sandwiches coming out with a beautiful brown coloring all the way across. The cheese is melted and the meat will be hot in the center. Following shortly behind the sandwiches, the rear belt will reveal our French fries that are crispy and golden brown. You can actually see the oil that we've removed from the product, so now it's a little healthier for your operation. We'll serve these up with our ciabatta sandwich and you'll full meal plated from the same oven and all were done without a vent hood while using 30 percent less energy. I hope you learned a little more about TurboChef and their conveyor. Once again, thanks for tuning into FoodTrends Live and we will see you again next time!

Copy and paste the embed code above.

Make the most out of your conveyor oven by using the Turbochef HHC2020! It is equipped with a 50/50 split conveyor belt that allows you to cook two different products with two different cooking times at once!

Specs
Width 48 3/8 Inches
Depth 35 3/8 Inches
Height 17 Inches
Belt Length 48 3/8 Inches
Cooking Chamber Length 20 Inches
Belt Width 4 - 15 Inches
Opening Width 20 Inches
Amps 40 Amps
Hertz 60
Phase 3
Voltage 208/240
Wattage 14,400 Watts
Baking Area 2.8 Square Feet
Cook Time 15 Minutes
Cook Time 30 Seconds
Exterior Material Stainless Steel
Interior Material Stainless Steel
Maximum Temperature 550 Degrees F
Number of Belts 2
Number of Chambers 1
Power Type Electric
Stackable Yes
Style Conveyor

Details

This TurboChef High h Batch 2020 countertop conveyor oven delivers high-heat transfer and fast cook times without the energy consumption and higher HVAC needs of larger ovens! Ideal for making pizza, pastries, and more, this oven can accommodate up to a full size sheet pan and features a 70 / 30 split belt with individual controls for each belt section, letting you cook two different products at the same time. It also comes with an internal catalytic filtration system to limit smoke, grease, and odor emissions. Sample cook times include (24) chicken wings in 4 minutes, (1) 16" pizza in 3 minutes, (125) shrimp in 3 minutes, and garlic bread and sandwiches in just 1 minute.

- 20" cook chamber

- Bake time from 30 seconds to 15 minutes

- Independently-controlled top and bottom air impingement; variable-speed High h recirculating impingement airflow system

- (2) 6" conveyor extensions

- Built-in self-diagnostics for monitoring oven components

- Smart Voltage Sensor Technology automatically detects and adjusts to proper voltage (208 or 240V only)

- Variable-speed blower motors

- Easy to clean mono-finger design

- Idle mode for energy conservation

- 4" legs

Overall Dimensions:
Left to Right: 48 3/8"
Front to Back: 35 3/8"
Height: 17"

Belt Dimensions:

Belt Length: 48 3/8"
Belt Width: 15" / 4"
Baking Area: 2.8 sq. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order once it is placed.

  • CE Listed

    CE Listed

    This item complies with the standards imposed by the Conformance European (CE), a division of the Intertek group.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • 15-50P

    15-50P

    This unit comes with a NEMA 15-50P plug.

Other Products from this Line

Related Items

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register