Name: T&S B-1146-CR-WS Wall-Mounted 1.5 GPM Workboard Faucet with Gooseneck Spout and Lever Handles
Brand: T&S Brass and Bronze Works
SKU: 510B1146CRWS
Price: 146.49 USD
Availability: LimitedAvailability

A T&S chrome wall-mounted faucet with gooseneck spout and lever handles.

Only

$146.49/Each

Ships free with Plus

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

Polished, chrome-plated brass body
Swivel gooseneck spout with 1.5 GPM aerator
Lever handles with color-coded temperature indexes
Ceramic cartridges included; temperature range from 40 to 140 degrees Fahrenheit
Convenient wall mount configuration; Install kit sold separately

UPC Code:400016506464

View all T&S Brass and Bronze Works Wall Mount Faucets

plus
T&S B-1105-KIT Inlet Kit with 24" Hoses and Elbows (1/2" NPT Female x 3/8" Compression)
$60.61/Each

Quantity: 1/Each
Shipping Weight: 4 lb.
Spout Length: 5 3/4 Inches
Faucet Width: 8 5/8 Inches
Faucet Height: 10 11/16 Inches
Cartridge Type: Ceramic
Faucet Centers: 4 Inches
Finish: Chrome
Flow Rate: 1.5 GPM
Handle Type: Lever
Material: Brass
Mounting Style: Wall Mounted
Mounting Type: Workboard
Pressure Rating: 60 PSI
Spout Clearance: 6 3/16 Inches
Spout Type: Gooseneck
Temperature Rating: 40 - 140 Degrees Fahrenheit
Type: Faucets
Water Inlet Size: 1/2 Inches

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works B-1146-CR-WS Details

Amplify the cleaning power in your establishment with this T&S wall-mounted workboard faucet. Equipped with a 5 3/4" gooseneck spout, this low-profile, chrome-plated brass faucet utilizes a 1.5 GPM aerator to deliver strong water pressure perfect for handwashing applications. The lever handles are labeled with color-coded indexes for quick identification of water temperature.

This faucet's 4" centers make it simple to install; the 1/2" NPT male inlet install kit (sold separately) provides all of the setup components you need. It is engineered for maximum durability and uses ceramic cartridges to adjust the flow rate and temperature range, from 40 degrees to 140 degrees Fahrenheit. When the handles of this faucet are turned, the cartridges spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.

Overall Dimensions:
Spout Length: 5 3/4"
Faucet Width: 8 5/8"
Faucet Height: 10 11/16"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Made in America
This item was made in the United States of America.
EPA WaterSense
This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.