The Structural Concepts Harmony HMBC2 27" dual service merchandiser is an attractive and convenient solution for your deli, bakery, coffee shop, or market. It combines a lighted, full service top that's enclosed by curved glass, with a lower self service bin to help increase impulse sales.
The upper display features a rear swinging door for restocking, and a convertible baffle so you can switch it easily from refrigerated to non-refrigerated if desired.
This Harmony HMBC2 features Structural Concepts' "Breeze" slide-out refrigeration system. This intelligent system has a microprocessor-controlled sensor that senses and adjusts to ambient temperature conditions. That way it will maintain average product temperatures of 41 degrees Fahrenheit or less. Greater temperature consistency means longer product shelf life! Plus, the entire system easily slides in and out of the merchandiser for cleaning and maintenance.
The Harmony HMBC2 dual service merchandiser features an attractive black interior and exterior, with black trim.
This 27" wide refrigerated dual service merchandiser requires a 120V electrical connection, and is ETL and NSF Listed. Please consult the Specification Sheet for additional details, measurements, and installation requirements.
Usually ships in 10 business days.
Overall Dimensions:
Width: 26 7/8"
Depth: 34 1/16"
Height: 56 1/4"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Standard Limited Warranty:
Structural Concepts Standard limited warranties: One-year parts/one-year labor/five-year motor-compressor.
Parts
One Year: Structural Concepts warrants to the original purchasers, the equipment manufactured by it to be free from defects in material and workmanship under normal use and service within 12 months from the date of original shipment from the factory.
Any items returned to the factory must be authorized by Structural Concepts Customer Service/Technical Service Departments and be shipped prepaid. Replacements will be shipped collect.
This warranty does not include any material, which has been subject to misuse, neglect, damage in transit, accident, negligence, or alteration.
Labor
One Year: Structural Concepts warrants to the original purchasers, the equipment manufactured by it. Structural Concepts will for a period of 12 months from the date of original shipment from the factory pay the cost of labor for repairs and replacement of parts that it has determined to be defective.
This warranty does not include the cost of labor for initial installation, start-up, correction of improper installations, misapplications, repair caused by abuse and negligence, modifications, normal adjustments, drive time to and from repair site, and freon recovery. The cost of service labor reimbursed will be based on straight-time rate and reasonable time for the repair of defect.
All service labor charges are subject to approval by Structural Concepts Technical Service Department. Contact your Master Service Agent. (See pages 70-72)
Motor-Compressor
Five Year: Structural Concepts warrants to the original purchasers that it will repair or exchange at our option, at any time during the five years following the date of original shipment from the factory a motor-compressor assembly of like design and capacity if the motor-compressor assembly or any part thereof is returned prepaid to nearest authorized jobber and is proved to our satisfaction to be inoperative due to defects in material or factory workmanship.
This warranty applies to the original motor compressor only.
The term “motor-compressor assembly" consists of the stator, rotor, eccentric rod, eccentric shaft piston, wrist pin, suction valve, discharge valve, and the cast housing in which these parts are enclosed.
This warranty does not apply to any electrical controls, condenser, evaporator, fan motors, overload switch, starting relay, temperature control, dryer, accumulator, or wiring harnesses after the first year.
No claims can be made against this warranty for spoilage of product. Replacement of the motor-compressor assembly must receive a prior approval from Structural Concepts Technical Service Department.
This warranty does not apply to compressors furnished by Structural Concepts that are remote from the case.
General Conditions: Structural Concepts recommends that the installation, inspection, and start-up of refrigeration equipment be performed by a qualified refrigeration technician.
Structural Concepts makes no other expressed or implied warranty, and no person or representative of the seller is authorized to add to the seller’s liabilities in connection with its products other than what is expressed.
These warranties do not apply to remote (compressor supplied by others) motor compressor applications.
Warranties listed here are for equipment located inside the continental United States and Canada.
All claims must contain the following information:
* The model and serial number of the equipment.
* The date of the equipment failure and place of installation.
* The name and address of the agency that performed the service work.
* A complete description of the equipment failure, circumstances relating to that failure, parts replaced and itemized list of all labor charges incurred.
Structural Concepts shall not be liable for any default or delay in performance caused by any contingency beyond its control.
Warranties do not include any food or business loss and transportation charges to or from Structural Concepts factory.
Condenser coils must be cleaned at regular intervals. Failure to do so can cause compressor malfunction and will void warranty. Cases are designed to operate in an environment of 75° F ambient and 55% relative humidity.
|
Loading
Suggestions...
for all your restaurant supply needs!
