• Free Shipping!  

$2,479.00/Each

Accessories & Options

  • Disposer only
  • Fully enclosed motor with built-in thermal overload protection
  • 208-230/460V, 3 Phase, 6.0/7.4/3.7 amp, UL Listed
Item:
463SS30025
Units:
Each
Shipping:
Usually Ships in 2-3 Business Days
MFR Item:
SS-300-25
UPC Code:
050375003144

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

InSinkerator Disposer Installation

InSinkerator Disposer Installation

The following procedures will help you install an InSinkerator food service disposer properly. First, if this is not a new installation clear the drain line of any waste. Auger the drain line from the drain trap to the main waste line to ensure that it is clear. A typical installation incorporates the following items: Disposer, disposer mounting, control center, solenoid valve, flow control valve, syphon breaker, electrical supply, drain line, water shut off valve, and the cold water supply. Prior to unpacking, verify the carton labels match each other and the power supply. After unpacking check to ensure that the spec plate on both the disposer and the control panel match the power supply. If required, install the disposer leg assembly on the SS-50 to SS-200 disposer. Note that the SS-300 and the larger disposers come with factor install legs. If your disposer is using a competitive mounting adapter it is recommender to install it with legs. Also use legs if the SS-120 and SS-200 is using the # 5 flange. To install the legs, first turn the unit upside down. Pry two guide hole plugs from the bottom cover. Make sure that the threaded stud is extended a minimum of 1-1/8” from the outer tube assembly. Insert the leg assemblies through the lower frame guide holes. Insert the screwdriver into the tube assembly and position in the slotted end of the threaded stud. Tighten the threaded stud into the threaded holes located in the upper end bell, and tighten both studs. Place the O ring on the tuber assembly and push up flush against the bottom cover. Place the washer inside of the guide hole plugs, and place on the bottom of the outer tube assembly. Now, you’re ready to install the disposer. The legs can be adjusted by turning the outer tube assembly until the assembly legs stand on the floor. To mount a disposer to an InSinkerator sink bowl or #6 or #7 mounting adaptor follow these instructions. Place the mounting flange up over the existing color adapt connect lip. It may require a slit force fit. Force the mounting flange up out of the way and fit the mounting gasket onto the sink bowl connect lip. Move the mounting flange down over the mounting gasket. Be certain that the threaded fasteners in the mounting flange fit into recesses into the top of the mounting gasket. Attach two screws through opposite holes in the mounting gasket and into the threaded fasteners in the mounting flange. The screws should be protruding approximately 1/4” below the mounting gasket. Position the disposer beneath the mounting gasket and engage the two protruding screws into key hole slots in the disposer body flange. This may require the use of an assistant or a block of wood to ease installation. Assembly the remaining 4 screws and turn the disposer into place for plumbing connections. Tighten all screws evenly to secure the unit. To install a #5 sink flange follow the instructions supplied with the kit. The #5 sink flange mounts to a standard 3-1/2 to 4” opening. When installing an InSinkerator disposer to another type of sink bowl, a special mounting adaptor is required. WE have a adaptors to fit most sink designs. Control the adapter guide for more information. When connecting the disposer to the incoming water supply, use as few elbows and tees as possible. Connect to the cold water line only. Install the flow control valve, water solenoid valve and the syphon breaker according the direction of the flow arrows marked on each valve body. It is recommended to use as shut off valve. Use the supplied water flow restrictor to ensure you have the proper flow. If there is too much water in the disposer the food will not grind completely. If there is too little water in the disposer, the food waste may not flow to the main sewer line. When connecting the drain line place the p-trap or floor drain as close to the disposer outlet flange as possible. Do not use plumbers putty on the threaded connection, instead use tape. Do not flex the connection. Consult the installation guide to find the recommended drain line diameter for your disposer’s model. Check to make sure that the proper slope is use with the connection going from the disposer to the floor drain or sewer connection. With this installation, we’re showing you the aquasaver disposer control center, which operates the disposer and control center operations. Each control has its own installation manual detailing how to connect the disposer, control, solenoid valve and power supply. Make sure the control center is properly grounded. If this is a new installation make sure that there is no construction debris in the disposer grind chamber. Verify the disposer is function properly by checking for leakers and the fresh water connections, mounting color and the waste outlet. Checking for excessive vibration and if the control center has reversing capabilities, confirm that it will reverse. If the control center is equipped with a post flush, ensure that the water runs after the disposer is turned off per the post flush setting: one – ten minutes. For more details on troubleshooting and operation, reference the installation manual included with your disposer. All disposers are backed by a one year one-site warranty on parts and labor. InSinkerator, the most trusted name in food waste management.

Copy and paste the embed code above.

In this video, you will learn how to install your InSinkerator disposer properly.

InSinkerator Disposer Operation

InSinkerator Disposer Operation

The following procedures will help you operate and InSinkerator food service disposer properly. First, let’s discuss what should and shouldn’t be placed into the disposer. Items that can be placed into the disposer consist of fruits, vegetables, meat, poultry dairy products, breads and grain products, bones and seafood. Items that should not be placed into the InSinkerator disposer consist of large amounts of string and fibrous materials such as artichokes, pineapple tops, corn husks as well as oyster shells as these items may cause drain line clogs. It is also recommended to avoid silverware, soda cans, glass, lids, plastic wrap, latex gloves and corrosive chemicals. Now we’re ready to operate the disposer. If this is a new installation make sure there is no construction debris in the disposer grind chamber. Do not preload the disposer with food waste prior to starting. Push the start button on the control panel to turn on the disposer and start water flowing into the disposer. Feed food waste into the disposer in a steady continuous flow. This food waste is ground into small particles in the disposer grind chamber. The ground food waste is then transferred through the plumbing into the main sewer line and ends up at the waste water treatment plant for processing. After all food waste is flushes away, allow the disposer to run for 30-60 seconds to clear itself before pushing the stop button on the control center to stop the unit. If a disposer should experience a jam, the disposer overload will trip. To free a jam follow these steps: Turn the control off and if equipped turn on the disconnect switch. Reach into the disposer and remove the excess material. Does the rotating shredder spin freely? If not, place the de-jamming wrench down onto the rotating shredder bars and rotate back and forth until the jam is free. Then remove the jammed item. Press the disposer overload reset button. If equipped, turn on the disconnect switch and wait 30 seconds. Turn the disposer on and begin feeding food waste into the disposer. To not use a hammer and pry bar as this may damage the rotating shredder. In review, to ensure optimal operation of your InSinkerator food waste disposer, we recommend that you start the unit prior to loading it, avoid batch feeding, gradually feed food waste and allow the unit to run 30-60 seconds after the last load of food waste has been processed. Using an InSinkerator food service disposer will help you reduce labor cost. Reduce waste hauling charges, increase efficiency and improve sanitation in your kitchen. And its good for the environment by keeping food waste out of landfills while using minimal water and electricity. Also, food waste put down the disposer can be captured as bio solids and used a fertilizer. Methane gas produced during treatment can be captured and recycled as energy. For more details on troubleshooting and operation reference the installation manual included with your disposer. All disposer are all backed by a 1 year one site warranty on parts and labor. InSinkerator, the most trusted name in food waste management.

Copy and paste the embed code above.

Check out this video to learn how to use your InSinkerator disposer! Plus, learn how it can help save you time and money while increasing efficiency.

Specs
Height 23 1/2 Inches
Amps 3.7 - 7.4 Amps
Hertz 60
Phase 3
Voltage 208-230/460
Wattage 1380 - 1702 Watts
Horsepower 3
Power Type Electric

Details

The Insinkerator SS-300-25 is a 3 hp commercial garbage disposer with a heavy duty capacity that's suitable for use at soiled dish tables, vegetable prep areas, and meat and seafood prep areas in larger restaurants, hotels, hospitals, or cafeteria kitchens that serve up to 750 persons per meal.

This 3 hp commercial disposer features a totally enclosed, air-cooled motor that's designed for efficiency and long life, thanks to its built-in thermal overload protection.

The Insinkerator SS-300-25 features a durable stainless steel grind chamber with stationary and rotating cast nickel chrome alloy cutting elements which help ensure dependable service.

This 3 hp Insinkerator SS-300-25 commercial disposer is backed by a full 1 year manufacturer's warranty from the installation date. It is UL Listed, and has the following electrical configuration: 208-230/460V, 60 Hz, 3 phase. It measures 23 1/2" high. For additional information, detailed measurements, and installation requirements, please consult the specification sheet.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing and transit times will vary. If you need your items by a certain date, please note this in the comment section while checking out! Please feel free to log on to our Live Chat should you have any questions before placing your order. After your order is placed, we will update you via email to let you know how this will be shipping to you.

Related Items

Have you used this product?

Log in to write your own review and earn up to $16.00 with video, photo, and text reviews!

Login or Register

Find Related Products

commercial garbage disposal