$1,232.00/Each

Contact us for pricing

Why do we do this?

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

Overall User Rating from 1 review

Features:

  • Adds versatility to equipment with a #12 hub

UPC Code:

400010643424

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

View All Items
Hobart VS9 Slicer Attachment

Hobart VS9 Slicer Attachment

The following operator training video on the Hobart model 9" vegetable slicer attachment is a supplement to the instruction manual that came with your Hobart vegetable slicer attachment. If you have any questions concerning operation, please consult your manual. Your Hobart 9" vegetable slicer attachment is constructed and designed to give long satisfactory service, providing it is properly used and maintained. This training video will cover the operation of the vegetable slicer attachment and it's cleaning. Warning, rotating knives inside. always use the feed pusher. Keep hands out. The Hobart 9" vegetable slicer attachment will operate with any machine equipped with a number 12 or number 22 attachment hub. Remember to always set the mixer speed so that it will have sufficient power to drive the vegetable slicer. The vegetable slicer may be used for slicing potatoes from 1/16th of an inch to 5/8" thickness. Adding vegetables such as cabbage for salads and coleslaw. Slicing cucumbers, celery, and other vegetables, slicing fruits such as bananas and nuts, and shredding and grating cheese, raw carrots, beets, and nuts. The attachment is made up of the following three basic units: the back case available in number 12 or number 22 attachment size, the front hopper with a feed pusher or tubular with a feed stopper. And, the plate and shaft units, and adjustable slicer, a shredder, or a grater. The back case mounts into the attachment hub of the mixer or food cutter or power drive and is retained by a thumbscrew on that machine. The standard front with the hopper and feed pusher behind. It hinges onto the back case and is held closed with a latch. To remove the front, lift the latch, and swing the front open and raise from the hinge hole. An optional tubular front is available which permits end feeding with a feed stopper. This is used when cutting at right angles to the plate. To adjust the slicer plate unit from approximately 1/16th of an inch to 5/8th of an inch, turn the mixer, food cutter, or power drive off and then turn the adjusting knob. It is not necessary to remove the unit from it's assembled position. Shredder plates are available with 3/32"-3/16"-5/16"-1/2" hole sizes. The coarse plate is normally used for making chopped slaw, cutting vegetables for soup stock, salad blends, or hash brown potatoes. The medium and finer plates are for fine shredding of carrots, beets, turnips, etc. and for salads or quick cooking use. The grater plate may be used for crumbling hard cheese or grating hard vegetables. To operate the vegetable slicer, stop the power unit, in this case, a Hobart 8600 mixer. Attach the back case of the slicer to the attachment hub with the thumb screw. Drop the hinge pins of the vegetable slicer into the holes in the flosses of the back case. And select the plate and shaft assembly such as the slicer plate to be used. Lift the plunger, and insert the plate and shaft assembly into drive position. Release the plunger. Set the slice adjustment, if used, to proper thickness. Close the vegetable slicer and fasten the latch. Set the speed, then start the machine being used as the power drive. Raise the feed pusher. Keep hands out of the hopper. Place the product to be sliced into the hopper and press down on the feed pusher. To much pressure crushes the food and causes irregularity in the slices. Warning. Unplug the electrical cord or disconnect the electrical supply before cleaning. To clean the attachment, release the latch and open the slicer front. Lift the plunger and withdraw the rotating unit. The shredder and grater plates are easily removed from the plate hub by rotating the plate counterclockwise to release the key slot from the shouldered stags. All parts may be immersed in warm, soapy water for cleaning. Rinse in hot, clear water and dry immediately. It is important that juices be cleaned from the slicer before they can dry. When using the adjustable slicer unit, make sure it is cleaned frequently to assure easy thickness adjustment. Use a drop of tasteless oil on the adjustment threads after cleaning. Occasionally disassemble the slicer unit for a thorough cleaning. To do this, it is necessary to unscrew the collar which has a left hand thread. The spring is then free for removal, along with the knife and shaft assembly. Unscrew the adjusting nut from the plate. Note, after cleaning, to prevent damage, the thrust bearing must be tightened until it is seated against the shoulder on the shaft. This concludes operator training for the Hobart model 9" vegetable slicer attachment. To obtain service and parts information concerning this vegetable slicer, contact your local Hobart service office.

Copy and paste the embed code above.

Learn how to properly clean, maintain, and use your Hobart VS9 9" vegetable slicer attachment by watching this informative training video!

Customer questions about this product

Do I need to apply lubricant to this attachment?
To ensure that your mixer or other equipment remains in good working order, always check to make sure the hub attachment or accessory is lubricated with food-safe lubricant before use.
I'm concerned that the plates and knives I have won't work with this hub. Is there a way I can be sure they will fit?
Measure the square hole in your plate or knife. A standard #12 hub fits plates and knives with a 9/16" square hole, while a standard #22 hub fits plates and knives with a 3/4" square hole.
Ask your own question!

Details

This Hobart VS9-12 9" slicer more than doubles the utility of your Hobart mixer or food cutter! Using stainless steel scimitar knives for fast, clean, uniform cutting, this slicer attachment easily cuts and slices a variety of products from cabbage and potatoes to nuts and beets. This Hobart VS9-12 9" slicer comes complete with a #12 back case, hopper front, and adjustable slicer plate.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Downloads

Spec Sheet Specsheet Hobart's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Compatible Models

This item is compatible with the listed models, according to the manufacturer. We do our best to keep this listing as accurate and up-to-date as possible. If you have any questions or concerns, feel free to contact a Customer Solutions Specialist before placing your order.

Related Items

Customers Also Viewed

Customer Reviews

  • Overall User Rating:

    Hobart VS9-12 9" Slicer Attachment with #12 Back Case, Hopper Front, and Adjustable Slicer Plate

    5.0 stars from 1 review

    1
    0
    0
    0
    0

    People Talk About:

    part mushrooms model kept imitation host hobart great finally cheeses

    we had a cheap imitation model and it kept breaking. we had it welded 4 times and finally decided to get the real hobart part. this has given us no trouble and works great for shredding cheeses and slicing mushrooms and a host of other things.

    from satchel's pizza inc Posted on

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register
× No Thank You

Save $812.01 with our Recommended Product!

This #12 slicer attachment with knife delivers comparable slicing performance for a fraction of the price! It boasts a 9/16" square hub and a machined, cast-aluminum housing with S-knife disc assembly.

Your selection

Hobart VS9-12 9" Slicer Attachment with #12 Back Case, Hopper Front, and Adjustable Slicer Plate

$1,232.00/Each

Contact us for pricing

Why do we do this?

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

  • Adds versatility to equipment with a #12 hub
Item:
425VS912
Units:
Each
Reviews:
1 review