$7,509.70/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- Easy-to use manual controls
- Water flow from 4.75 to 10 U.S. gallons per minute
- 120V
- Quantity
- 1/Each
- Shipping Weight
- 25 lb.
- Width
- 17 Inches
- Depth
- 6 7/8 Inches
- Height
- 17 5/8 Inches
- Hertz
- 60 Hertz
- Phase
- 1 Phase
- Voltage
- 120 Volts
- Control Type
- Manual
- Pressure
- 15 - 70 PSI
- Temperature Range
- 35 - 140 Degrees F
- Water Inlet Size
- 1/2 Inches
Doyon Baking Equipment WM35 Details
Avoid dry crumb and flat flavored bread by precisely controlling the amount of water in your recipes with the Doyon WM35 water meter! This water mixer will dispense 4.75 to 10 U.S. gallons per minute with a water pressure ranging from 15 to 70 psi. Its volume measurement accuracy is plus or minus 1%, allowing for precise and complete control over the water-adding process. You will always know the exact temperature of the water since the unit gives precise water temperature readings from 35 to 140 degrees Fahrenheit. An 8.2-foot hose is included for the water outlet, and the meter comes standard with a 1/2" NPT water inlet.
- Easy-to-use manual controls and digital panel
- Water flow from 4.75 to 10 U.S. gallons per minute
- Water pressure from 15 to 70 psi
- Volume measurement plus or minus 1%
- Reads minimum and maximum temperature range: 35 to 140 degrees Fahrenheit
- 1/2" NPT water inlet
- 120V
Overall Dimensions:
Left to Right: 17"
Front to Back: 6 7/8"
Height: 17 5/8"
5-15P
This unit comes with a NEMA 5-15P plug.
ETL, US & Canada
This product has been certified by ETL, a division of the Intertek Group, to meet applicable electrical product safety standards required for use in the United States and Canada.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
Doyon Baking Equipment WM35
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.
Please note that this item is subject to a 5% Warranty Administration Fee for all orders shipping outside of the United States or Canada. These orders may also be subject to other charges, including utility configuration and/or CE approval fees.