$77,059.00/Each

Earn up to $2,311.77 back (231,177 points)with a Webstaurant Rewards Visa® Credit Card

Other Available Configurations:

Special Order Shipping

An estimated delivery date will be provided after placing the order

Product Overview

  • Reduces volume of food waste at 1,000 lb. per hour
  • 304 stainless steel construction with 1 1/2" adjustable bullet feet
  • Strong magnet prevents lost and damaged flatware
  • Water extractor features a removable gasketless door and exterior drain handle
  • 7.5 hp grinding motor and 3 hp extractor motor
UPC Code:400016340402

Champion P7-30 Specs

Quantity
1/Each
Shipping Weight
1000 lb.
Width
57 3/4 Inches
Depth
42 1/4 Inches
Height
60 5/16 Inches
Chamber Diameter
30
Amps
40 Amps
Hertz
60 Hertz
Phase
3 Phase
Voltage
208 Volts
Features
Adjustable Legs  Made in America  Magnetic Catch  NSF Listed
Horsepower
7 1/2 HP
Output
1,000 Pounds Per Hour
Power Type
Electric
Stainless Steel Type
Type 304

Customer questions about this product

Is there anything else I should consider before ordering this item?

This item carries a 25% restocking fee for returns. Please be sure to check all necessary utility connections and installation requirements to be sure that this item will install correctly. Contact our customer solutions team if you have any questions so we can help ensure you purchase the right product and configuration for your needs!

Ask your own question!

Champion P7-30 Details

Enhance efficiency and reduce waste with this Champion P7-30 30" pulper waste handling system. With an initial input of 24 gallons, this system effectively shrinks the volume of food waste at up to 1,000 lb. of waste per hour. It can even handle paper and cardboard through extreme compression. The 30" slurry chamber uses 2 tool rotating sheering blades and 3 stationary blocks to grind up food and other particles into a slurry mixture. The stationary blocks have 4 cutting surfaces each, and the slurry chamber runs on a 7.5 hp grinding motor. The motor is protected by a seal between the flushing valve and pump.

This free-standing unit is constructed with durable 304 stainless steel. The standard feed tray leaves you with ample space for pots and dishes, and a strong magnet traps flatware, reducing waste and damage to your reusable utensils. Plus, the stainless steel tubular legs with bullet feet can adjust up to 1 1/2" so that your unit stands level and sturdy. It has a 1 1/2" drain connection and a 1/2" cold water connection.

Once the food and paper waste is ground up, the 3 hp water extractor chamber removes water from the slurry, and the compression cone dispenses a semi-dry pulp into waste containers. The remaining waste is a fraction of the original volume, saving enormous amounts of space that would have been taken up by full-sized, discarded food and paper products. This chamber features a gasketless water extractor door and a convenient, external drain handle for quick and easy cleaning. A start / stop switch is mounted to the water extractor, and the control box and circuit breaker are remote-mounted as well. This pulper waste handling system is perfect for use in high-volume food service establishments such as restaurants, event venues, hospitals, and university cafeterias.

Overall Dimensions:
Slurry Chamber Diameter: 30"
Width: 57 3/4"
Depth: 42 1/4"
Height: 60 5/16"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • U.S. Green Building Council (USGBC)

    U.S. Green Building Council (USGBC)

    This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
Champion P7-30

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.