Urnex 19-P22-FC120-12 Biocaf 120 ct. 1.3g Coffee Equipment Cleaning Tablets

Urnex 19-P22-FC120-12 Details

Coffee residue and oils can build up in your espresso machines and coffee equipment over time, but Urnex 19-P22-FC120-12 Biocaf 1.3g coffee equipment cleaning tablets can eliminate them in just a couple of simple steps! Made with all-natural, organic, and phosphate-free ingredients, these cleaning tablets remove residue and oils that forms in espresso machines, supreautomatics, and batch brewers. Each jar contains 120 tablets that are sure to keep your coffee equipment clean!

Whether you're looking to clean superautomatics, traditional espresso machines, or batch brewers, these coffee equipment cleaning tablets are the perfect solution! These tablets offer a convenient and controlled cleaning method with numerous uses. Use them to clear screens and filters, to remove stains from filter baskets, or even as a soaking solution to clean your most used accessories and equipment!

Cleaning Instructions:

Traditional Espresso Machines
Step 1: Insert blind filter and add 1 tablet. Insert portafilter into grouphead.
Step 2: Activate brew cycle for 10 seconds. Stop 10 seconds. Repeat 5 times.
Step 3: Remove portafilter. Activate brew cycle and rinse portafilter in stream of water from grouphead. Stop cycle.
Step 4: To clear grouphead of remaining cleaner, activate brew cycle for 10 seconds without any cleaner. Stop 10 seconds. Repeat 5 times.
Step 5: Make and discard a shot of espresso.

Superautos
Step 1: Locate and initiate the cleaning cycle on the machine.
Step 2: Add the specified quantity of the tablet that is recommended by the manufacturer, and follow any further instructions provided by the machine manufacturer.

Batch Brewers and Servers
Step 1: Empty coffee from equipment and place 2 tablets per liter of brewer capacity directly into brew basket.
Step 2: Run a full brew cycle into each vessel. Hold for 30 minutes.
Step 3: Rinse with clean hot water.

Soaking Parts and Accessories
Step 1: Create a soaking solution using 4 tablets for every liter of hot water.
Step 2: Place dirty part in the cleaning solution. If soaking a portafilter, do not submerge the handle.
Step 3: Allow the part to soak for 30 minutes.
Step 4: Remove the part and rinse with fresh water.